manual

Setup

V5 Reference Manual

254

 When the setup method select button is DVS or MANUAL

If you want to enter the device label of an I/O device and mount it, press the DVS or MANUAL

button to access the DVS/MANUAL field.

1 DEVICE LABEL

Displays the device label of the I/O device which you entered from the keyboard.

2 INPUT/OUTPUT knobs

Use the [TOUCH AND TURN] knob to specify the number of inputs and outputs on the

Dante audio network.

3 Device label entry keyboard

Use this keyboard to enter the device label of the I/O device.

NOTE

• If the I/O device is a DVS, mount it by pressing the DVS button.

• If DEVICE LABEL is left blank, the first DVS detected is automatically mounted.

• If the device label you entered is detected automatically, the INPUT/OUTPUT knob settings will

be ignored, and the rated number of inputs and outputs will be specified.

REMOTE HA settings

Here’s how to select which of the multiple HA devices on the Dante audio network will be

mounted so that they can be used. Up to 8 units can be mounted for one QL series console.

A device having a large number of channels occupies two racks. For such device, you can

only mount on odd numbered racks. Also, it is necessary to have two racks in a row. Up to

four units can be mounted.

DANTE SETUP window (REMOTE HA page)

1 CLEAR ALL button

Clears all HA devices in the list to an unmounted state.

2 REFRESH button

Updates the displayed list of HA devices on the Dante audio network.

STEP

1. Press the REMOTE HA ASSIGN tab in the lower part of the DANTE SETUP window.

2. Press a HA device select button to access the REMOTE HA SELECT window.

3. Select the HA device to mount and press the OK button.

If you have changed the setting by pressing the WITH RECALL button, a

confirmation dialog box will appear. Press the OK button.

13 2