manual

Setup

V5 Reference Manual

255

3 HA device select buttons

Press one of these buttons to open the REMOTE HA SELECT window. The upper line of

the button shows the device label. The lower line of the button shows the model name

and the number of inputs and outputs. If no device has been mounted, the upper row

will indicate “---” and the lower row will show nothing.

For more information on VIRTUAL/CONFLICT/DUPLICATE shown below these buttons,

refer to

1 on page 163, “I/O device list.”

REMOTE HA SELECT window

1 DEVICE LIST

Shows a list of the HA devices on the Dante audio network.

2 WITH RECALL button

If this button is on, the settings saved in the QL series console will be applied to the HA

device when the QL series console starts up and when a scene is recalled.

3 DEVICE LIST select knob

Use the [TOUCH AND TURN] knob to select the HA device that you want to mount.

NOTE

• Do not specify “WITH RECALL” if an HA device is shared by multiple QL series consoles and

settings have already been made on a different QL series console.

• The HA device can also be operated from a QL series console that is not set to “WITH RECALL.”

• If an external QL series console has been mounted, you can set up and control the QL series

console’s INPUT HA in this window. However, make sure that the UNIT ID of the QL series

console does not match the UNIT IDs of any other HA device.

Displaying the device status

You can use the touch screen to verify the status of a connected QL series or R-series unit

(except the Ro8-D) or the Dante status. In order to verify the status of an R-series unit from

the console, it must be assigned to REMOTE HA in DANTE SETUP.

 QL series

The SETUP field of the DANTE SETUP window shows indicators for the status of the QL

series console and the Dante network.