manual

Setup

V5 Reference Manual

261

Using FADER START

Make FADER START settings if you want a device connected to a GPI OUT port to operate

in tandem with fader operations.

MIDI/GPI screen (FADER START page)

1 CLEAR ALL button

Clears all selections.

 OUTPUT DESTINATION field

GPI OUT1–GPI OUT5 buttons

Select the GPI OUT port for which you want to make settings.

3 Fader indicator

This indicates the selected fader. Use the [SEL] keys on the panel to select a fader.

NOTE

In the case of QL1, channels that do not exist on the model will not be shown.

STEP

1. Connect an external device to the QL series console’s GPI connector.

2. In the Function Access Area, press the SETUP button.

3. In the SETUP screen, press the MIDI/GPI button.

4. In the MIDI/GPI screen, press the FADER START tab.

5. For each GPI OUT port, specify the channel that will cause the external device to

operate, and the type of operation.

SETUP screen MIDI/GPI screen

58 6 7