manual

Input channels

V5 Reference Manual

1 LR-MONO SELECT field

Select one of the four buttons. The button you select lights up, and the others go off.

If a stereo input channel is selected, the OVERVIEW screen will appear as shown below.

2 LR-MONO SELECT button

This a toggle button. The setting switches each time the button is pressed.

Surround output for input channels

Setting Surround mode

You can enable surround mixes by changing bus settings to Surround mode.

NOTE

When you switch from Stereo mode to Surround mode, the signals for MIX1/2, 3/4, and 5/6

change to MONO x2.

However, when you switch from Surround mode to Stereo mode, the signals for MIX1/2, 3/4, and

5/6 remain as MONO x2.

Normal STEREO setting

L-MONO

R-MONO

LR-MONO

STEP

1. In the Function Access Area, press the SETUP button.

2. In the SETUP screen, press the SURROUND SETUP button (page 205).

3. Press the 5.1 SURROUND button.

4. Assign channels to MIX 1 - 6 for surround output.

5. Press the APPLY button.

6. Press the OK button in the confirmation dialog box.

SETUP screen

SURROUND SETUP screen