manual

ManualsBrandsYamaha ManualsAudio MixerQL5

Scene memory

V5 Reference Manual

Editing scene memories

This section explains how to sort the scenes stored in scene memory, edit their titles, and

copy and paste them.

Sorting scene memories

SCENE LIST window

1 Sort button

The list will be sorted as follows, according to the column heading you press.

•NO.

Sorts the list in order of scene number.

•TITLE

Sorts the list in numerical/alphabetical order of title.

• COMMENT

Sorts the list in numerical/alphabetical order of comments.

• TIME STAMP

Sorts the list in order of date of creation.

NOTE

By pressing the same location again, you can change the sorting order (ascending or

descending).

2 Write-protect

Indicates the Write Protect on/off status. Press this button to write-protect the scene. A

lock icon will appear. Press it again to cancel write protection.

3 TITLE field

Press this field to open the SCENE TITLE EDIT window, in which you can enter the title

for the scene. You can edit titles in this window.

4 COMMENT field

Press this field to open the SCENE COMMENT EDIT window, in which you can enter

comments for the scene. You can edit comments in this window.

5 STATUS field

Indicators in this field indicate the setting status of the FOCUS, FADE TIME, PLAYBACK

(playback link), and GPI (General Purpose Interface) functions. (The Playback Link

function plays a desired song in a specified time duration after a scene is recalled.)

6 TIME STAMP field

Indicates the date and time the scene was stored.

For details on the TIME STAMP display format, refer to “Setting the date and time of the

internal clock” on page 242.

7 CURRENT SETTING field

Specifies the content that will be saved by the next scene store operation. Changes

made here are immediately reflected on the QL series console.

8 Tabs

Enable you to switch between items. You can use tabs to switch the view of the right

half of the window between five different fields (COMMENT/FOCUS/FADE TIME/GPI

OUT/PLAYBACK LINK).

STEP

1. Press the SCENE field in the Function Access Area.

2. Press the COMMENT tab at the bottom of the SCENE LIST window.

3. Rotate the [TOUCH AND TURN] knob on the top panel to select a scene.

4. Edit the scene.

1 11 2