manual

Scene memory

V5 Reference Manual

FADE TIME window (GLOBAL mode)

You can select the channels to which Fade will be applied, and adjust the fade time. To display

this window, press the SET button in the FADE TIME field in the SCENE LIST window.

1 Channel display field

The channels or DCA groups to which Fade is applied are highlighted. To select the

channels or DCA groups to which Fade is applied, press the [SEL] keys for the channels

or DCA groups. Press the same [SEL] key once again to de-select the channel.

2 FADE TIME knob

Sets the fade time. You can use the [TOUCH AND TURN] knob to adjust the values.

The range is 0.0 sec – 60.0 sec.

NOTE

The fade time is used for all channels and DCA groups selected in the channel display field.

3 SET ALL button

Press this button to apply the Fade effect to all faders of that scene.

4 CLEAR ALL button

Press this button to cancel the Fade function for all faders of that scene.

NOTE

In the case of the QL1, faders that do not exist on the model will not be shown.

FADE TIME window (INDIVIDUAL mode)

The INDIVIDUAL mode allows you to control fading and fade time of each channel

individually. When the INDIVIDUAL button is set to on, press the SET button in the FADE

TIME field of the SCENE LIST window to open the FADE TIME window.

1 Display switch buttons

Switches the display of the FADE TIME window.

TIME

• FADE TIME knob ................... Sets the fade time. You can adjust the value by using

the [TOUCH AND TURN] knob.

The range is 0.0 sec to 60.0 sec.