manual

Recorder
Reference Manual
178
Using the QL console with Nuendo Live
The QL series consoles can operate in an integrated manner with Steinberg’s Nuendo Live
DAW software.
The “Yamaha Console Extension” software which integrates the QL series and Nuendo Live
can be installed in your computer, allowing you to operate Nuendo Live from the QL series
console to easily perform multi-track recording operations.
This section explains how to operate Nuendo Live from the QL series console.
Preparing the project
Refer to “Recording or playing back using a computer DAW” on page 175 to make the
following settings.
• Settings for Dante Virtual Soundcard or Dante Accelerator
• Setting up Dante Controller
• Setting up Nuendo Live
Recording into a project
RECORDER screen (when selecting the Nuendo Live tab)
1 Nuendo meter display field
This shows the channel levels of Nuendo Live.
2 PEAK CLEAR button
Clears the peak levels indicated by the peak hold function.
3 Marker list field
Lists the marker information recorded in the current Nuendo Live project.
The markers can be selected by pressing the on-screen list or by using the [TOUCH AND
TURN] knob.
4 Nuendo Live SETUP button
Specify the device that the console will use for communication when working with
Nuendo Live (page 179).
5 DANTE INPUT PATCH button
Press this to access the DANTE INPUT PATCH window (page 150).
6 Location information display
This displays information for the current location of the Nuendo Live project. You can
press the button at the right to switch the time display format.
STEP
1. In the Function Access Area, press the RECORDER button.
2. Press the Nuendo Live tab in the upper right of the RECORDER screen.
3. Press the EASY RECORDING button to start recording.
4. When you finish recording, press the record lock button and then press the STOP
button.
RECORDER screen
(when selecting the Nuendo
Live tab)
1
6
3
2
4
5
FEDCBA0987
G
H I