manual
Table Of Contents
- How to Use This Reference Manual
- Contents
- Function Tree
- SELECTED CHANNEL section
- Channel Strip section
- Input and output patching
- Input channels
- Signal flow for input channels
- Specifying the channel name, icon, and channel color
- Making HA (Head Amp) settings
- Sending the signal from an input channel to the STEREO/MONO bus
- Sending a signal from an input channel to a MIX/ MATRIX bus
- Channel name display indication
- Correcting delay between channels (Input Delay)
- Surround output for input channels
- Channel library operations
- OUTPUT channels
- Signal flow for output channels
- Specifying the channel name, icon, and channel color
- Sending signals from MIX channels to the STEREO/ MONO bus
- Sending signals from MIX channels and STEREO/ MONO channels to MATRIX buses
- Correcting delay between channels (Output Delay)
- Using the PORT TO PORT function
- Channel library operations
- EQ and Dynamics
- Channel Job
- Scene memory
- Monitor and Cue functions
- Talkback and Oscillator
- Meters
- Graphic EQ, Parametric EQ, effects, and Premium Rack
- I/O devices and external head amps
- MIDI
- Recorder
- Setup
- About the SETUP screen
- User settings
- Preferences
- USER DEFINED keys
- Functions that can be assigned to USER DEFINED keys
- USER DEFINED knobs
- Functions that can be assigned to USER DEFINED knobs
- Custom fader bank
- Console Lock
- Saving and loading setup data to and from a USB flash drive
- Word clock and slot settings
- Using cascade connections
- Basic settings for MIX buses and MATRIX buses
- Switching the entire phantom power supply on/ off
- Specifying the brightness of the touch screen, LEDs, channel name displays, and lamps
- Setting the date and time of the internal clock
- Setting the network address
- Setting up the Dante audio network
- Using GPI (General Purpose Interface)
- Help function
- Other functions
- Initializing the unit to factory default settings
- Adjusting the detection point of the touch screen (Calibration function)
- Adjusting the faders (Calibration function)
- Fine-tuning the input and output gain (Calibration function)
- Adjusting the LED color (Calibration function)
- Adjusting the brightness of the channel name display
- Adjusting the contrast of the channel name display
- Initializing the Dante audio network settings
- Warning/Error Messages
- Index
- Data List
- Contents
- EQ Library List
- DYNAMICS Library List
- Dynamics Parameters
- Effect Type List
- Effects Parameters
- Premium Rack Processor Parameters
- Parameters that can be assigned to control changes
- NRPN parameter assignments
- Mixing parameter operation applicability
- MIDI Data Format
- Input/Output Specifications
- Electrical characteristics
- Mixer Basic Parameters
- Pin Assignment Chart
- MIDI Implementation Chart
Contents
Reference Manual
2
Contents
How to Use This Reference Manual .......................................................................... 1
Function Tree ............................................................................ 4
SELECTED CHANNEL section ...................................................... 6
Operations in the SELECTED CHANNEL section ....................................................... 6
Channel Strip section.............................................................. 11
Operations in the Channel Strip section................................................................. 11
Input and output patching..................................................... 14
Changing the input patch settings......................................................................... 15
Changing the output patch settings ...................................................................... 16
Inserting an external device into a channel ............................................................ 18
Directly outputting an INPUT channel ................................................................... 21
Input channels ........................................................................ 23
Signal flow for input channels................................................................................ 23
Specifying the channel name, icon, and channel color........................................... 24
Making HA (Head Amp) settings............................................................................ 26
Sending the signal from an input channel to the STEREO/MONO bus ................... 30
Sending a signal from an input channel to a MIX/MATRIX bus .............................. 34
Channel name display indication ........................................................................... 37
Correcting delay between channels (Input Delay).................................................. 37
Surround output for input channels....................................................................... 40
Channel library operations..................................................................................... 44
OUTPUT channels.................................................................... 45
Signal flow for output channels ............................................................................. 45
Specifying the channel name, icon, and channel color........................................... 46
Sending signals from MIX channels to the STEREO/MONO bus ............................. 47
Sending signals from MIX channels and STEREO/MONO channels to
MATRIX buses............................................................................................. 49
Correcting delay between channels (Output Delay)............................................... 51
Using the PORT TO PORT function ........................................................................ 52
Channel library operations..................................................................................... 53
EQ and Dynamics ..................................................................... 54
Using EQ ................................................................................................................ 54
Using dynamics ...................................................................................................... 57
Using the EQ or Dynamics libraries ......................................................................... 60
Channel Job ............................................................................. 61
DCA group............................................................................................................. 61
Mute group............................................................................................................ 63
Using the Recall Safe function................................................................................. 66
Channel Link function ............................................................................................ 69
Copying, moving, or initializing a channel.............................................................. 74
About Mix Minus.................................................................................................... 77
Scene memory ......................................................................... 79
Storing and recalling scenes ................................................................................... 80
Editing scene memories.......................................................................................... 84
Using the Global Paste function.............................................................................. 86
Using the Focus Recall function .............................................................................. 88
Using the Fade function.......................................................................................... 90
Outputting a control signal to an external device in tandem with scene recall
(GPI OUT) ................................................................................................... 92
Playing back an audio file that links to a scene recall............................................... 93
Using Preview mode............................................................................................... 94
Monitor and Cue functions ..................................................... 96
Using the Monitor function .................................................................................... 97
Using the Cue function......................................................................................... 103
Talkback and Oscillator......................................................... 108
Using Talkback ..................................................................................................... 108
Using the Oscillator function ................................................................................ 110
Meters.................................................................................... 113
Operations in the METER screen ........................................................................... 113
Graphic EQ, Parametric EQ, effects, and Premium Rack....... 118
About the virtual rack ........................................................................................... 118
Virtual rack operations.......................................................................................... 119
Graphic EQ operations ......................................................................................... 122
About AUTOMIXER............................................................................................... 129
Editing the internal effects .................................................................................... 132
Effects and tempo synchronization ....................................................................... 138
Using the Premium Rack....................................................................................... 139
Using the graphic EQ, parametric EQ, effect, and Premium Rack libraries ............. 148