manual

Setup

Reference Manual

225

 When the setup method select button is DEVICE LIST

To mount by choosing from a list of the I/O devices on the Dante audio network, press the

DEVICE LIST button to display the DEVICE LIST field.

1 DEVICE LIST

Shows a list of the I/O devices on the Dante audio network.

From the list, choose the I/O device that you want to mount.

2 DEVICE LIST select knob

Use the [TOUCH AND TURN] knob to select the I/O device that you want to mount.

3 INPUT/OUTPUT knobs

Use the [TOUCH AND TURN] knob to specify the number of inputs and outputs on the

Dante audio network. If the selected I/O device is supported by the QL series, the inputs

and outputs will be entered and displayed automatically.

 When the setup method select button is SUPPORTED DEVICE

If you want to select and mount an I/O device that is supported by the QL series, press the

SUPPORTED DEVICE button to see the SUPPORTED DEVICE field. These settings can be

made even when not connected to a Dante audio network.

1 DEVICE TYPE

This area shows a list of the I/O device types that are supported by the QL series.

From the list, choose the type of I/O device that you want to mount.

2 DEVICE TYPE select knob

Use the [TOUCH AND TURN] knob to select the type of I/O device that you want to

mount.

3 I/O device indication

This area shows the selected I/O device.

The upper line shows the front panel of the I/O device.

The lower line shows the model name and the number of inputs and outputs.

4 UNIT ID knob

Use the [TOUCH AND TURN] knob to specify the UNIT ID.

The indicator shows the UNIT ID.