manual
Table Of Contents
- How to Use This Reference Manual
- Contents
- Function Tree
- SELECTED CHANNEL section
- Channel Strip section
- Input and output patching
- Input channels
- Signal flow for input channels
- Specifying the channel name, icon, and channel color
- Making HA (Head Amp) settings
- Sending the signal from an input channel to the STEREO/MONO bus
- Sending a signal from an input channel to a MIX/ MATRIX bus
- Channel name display indication
- Correcting delay between channels (Input Delay)
- Surround output for input channels
- Channel library operations
- OUTPUT channels
- Signal flow for output channels
- Specifying the channel name, icon, and channel color
- Sending signals from MIX channels to the STEREO/ MONO bus
- Sending signals from MIX channels and STEREO/ MONO channels to MATRIX buses
- Correcting delay between channels (Output Delay)
- Using the PORT TO PORT function
- Channel library operations
- EQ and Dynamics
- Channel Job
- Scene memory
- Monitor and Cue functions
- Talkback and Oscillator
- Meters
- Graphic EQ, Parametric EQ, effects, and Premium Rack
- I/O devices and external head amps
- MIDI
- Recorder
- Setup
- About the SETUP screen
- User settings
- Preferences
- USER DEFINED keys
- Functions that can be assigned to USER DEFINED keys
- USER DEFINED knobs
- Functions that can be assigned to USER DEFINED knobs
- Custom fader bank
- Console Lock
- Saving and loading setup data to and from a USB flash drive
- Word clock and slot settings
- Using cascade connections
- Basic settings for MIX buses and MATRIX buses
- Switching the entire phantom power supply on/ off
- Specifying the brightness of the touch screen, LEDs, channel name displays, and lamps
- Setting the date and time of the internal clock
- Setting the network address
- Setting up the Dante audio network
- Using GPI (General Purpose Interface)
- Help function
- Other functions
- Initializing the unit to factory default settings
- Adjusting the detection point of the touch screen (Calibration function)
- Adjusting the faders (Calibration function)
- Fine-tuning the input and output gain (Calibration function)
- Adjusting the LED color (Calibration function)
- Adjusting the brightness of the channel name display
- Adjusting the contrast of the channel name display
- Initializing the Dante audio network settings
- Warning/Error Messages
- Index
- Data List
- Contents
- EQ Library List
- DYNAMICS Library List
- Dynamics Parameters
- Effect Type List
- Effects Parameters
- Premium Rack Processor Parameters
- Parameters that can be assigned to control changes
- NRPN parameter assignments
- Mixing parameter operation applicability
- MIDI Data Format
- Input/Output Specifications
- Electrical characteristics
- Mixer Basic Parameters
- Pin Assignment Chart
- MIDI Implementation Chart
Function Tree
Reference Manual
4
Function Tree
Page numbers in parentheses ( ) are the page numbers of the
Owner’s Manual (booklet).
Main
SELECTED CHANNEL 6
OVERVIEW 11
FUNCTION ACCESS AREA (17)
CHANNEL PARAMETER
PATCH/NAME 15, 24, 46
GAIN/PATCH 26
1ch 26
8ch 27
CH1–32 29
CH33–64/ST IN 29
OUTPUT
Indication only
INPUT DELAY 37
8ch 37
CH1–32 38
CH33–64/ST IN 38
DELAY SCALE 37
INSERT/DIRECT OUT 19
1ch 19, 21
8ch 19, 22
HPF/EQ 54
1ch 54
8ch 56
CH1–32 56
CH33–64/ST IN 56
OUTPUT 56
DYNAMICS 57
1ch 57
KEY IN SOURCE SELECT 58
8ch 59
CH1–32 59
CH33–64/ST IN 59
OUTPUT 59
MIX SEND/MATRIX SEND 36
TO STEREO/MONO 47
8ch 47
CH1–32 48
CH33–64/ST IN 48
OUTPUT 48
SURROUND 40
LIBRARY
CHANNEL LIBRARY 44
EQ LIBRARY 60
DYNAMICS LIBRARY 60
GEQ/PEQ LIBRARY 148
EFFECT LIBRARY 148
Portico5033/Portico5043/U76/Opt-2A/
EQ-1A/DynamicEQ LIBRARY
148
DANTE INPUT PATCH LIBRARY 150
RACK
VIRTUAL RACK 119
RACK MOUNTER 122
GEQ EDIT 123
GEQ LINK 124
EFFECT RACK 134
EFFECT EDIT 134
EFFECT TYPE 135
PREMIUM RACK 139
PREMIUM RACK MOUNTER 140
PREMIUM RACK EDIT 141
AUTOMIXER 129
PARAMETRIC EQ 126
I/O DEVICE
DANTE PATCH 149
DANTE SETUP 149
DANTE INPUT PATCH 150
DANTE OUTPUT PATCH 151
I/O 152
REMOTE HA EDIT 154
DANTE OUTPUT PATCH 151
AMP 155
DANTE OUTPUT PATCH 151
WIRELESS 155
EXTERNAL HA 158
EXTERNAL HA PORT SELECT 159
EXTERNAL HA EDIT 159
INTERNAL HA 160
MONITOR
MONITOR 97
CUE 106
MONITOR 99
OSCILLATOR 111
TALKBACK 109
METER
INPUT METER 113
OUTPUT METER 113
SETUP
USER SETUP 182
PREFERENCE 192
USER DEFINED KEYS SETUP 194
USER DEFINED KEY SETUP (List) 194
USER DEFINED KNOBS SETUP 199
USER DEFINED KNOB SETUP (List) 199
CUSTOM FADER BANK/MASTER FADER 202
FADER ASSIGN SELECT 202
USER LEVEL/CREATE USER KEY 185
CREATE KEY 186
SAVE KEY 189
LOGIN 187
SAVE/LOAD 204
WORD CLOCK/SLOT 211