manual

Input and output patching

Reference Manual

INSERT/DIRECT OUT window (1ch)

1 DIRECT OUT field

Enables you to make settings for direct output. Press one of four fields to choose PRE HPF

(immediately before the HPF), PRE EQ (immediately before the EQ) or PRE FADER

(immediately before the fader), or POST ON (immediately after the [ON] key) as the direct

output position.

2 DIRECT OUT PATCH button

Displays the currently-selected Direct Out output port. Press this button to open the

PORT SELECT window, in which you can select an output port.

3 DIRECT OUT ON button

Switches the Direct Out on or off.

4 DIRECT OUT LEVEL knob

Indicates the output level of the Direct Out. You can use the [TOUCH AND TURN] knob

to adjust the level.

5 APPLY TO ALL INPUT button (input channels only)

Specifies whether the insert point/Direct Out point settings will be applied to all input

channels.

6 Close button

Closes the screen.

DIRECT OUT screen (8ch)

1 DIRECT OUT ON button

Switches the Direct Out on or off. The currently-selected Direct Out point is indicated

above the button.