manual
Table Of Contents
- How to Use This Reference Manual
- Contents
- Function Tree
- SELECTED CHANNEL section
- Channel Strip section
- Input and output patching
- Input channels
- Signal flow for input channels
- Specifying the channel name, icon, and channel color
- Making HA (Head Amp) settings
- Sending the signal from an input channel to the STEREO/MONO bus
- Added pan function (Monaural input channels only)
- Sending a signal from an input channel to a MIX/ MATRIX bus
- Channel name display indication
- Correcting delay between channels (Input Delay)
- Surround output for input channels
- Channel library operations
- OUTPUT channels
- Signal flow for output channels
- Specifying the channel name, icon, and channel color
- Sending signals from MIX channels to the STEREO/ MONO bus
- Sending signals from MIX channels and STEREO/ MONO channels to MATRIX buses
- Correcting delay between channels (Output Delay)
- Using the PORT TO PORT function
- Channel library operations
- EQ and Dynamics
- Channel Job
- Scene memory
- Monitor and Cue functions
- Talkback and Oscillator
- Meters
- Graphic EQ, Parametric EQ, effects, and Premium Rack
- I/O devices and external head amps
- MIDI
- Recorder
- Setup
- About the SETUP screen
- User settings
- Preferences
- USER DEFINED keys
- Functions that can be assigned to USER DEFINED keys
- USER DEFINED knobs
- Functions that can be assigned to USER DEFINED knobs
- Custom fader bank
- Console Lock
- Saving and loading setup data to and from a USB flash drive
- Remount function to USB flash drives
- Word clock and slot settings
- Using cascade connections
- Basic settings for MIX buses and MATRIX buses
- Switching the entire phantom power supply on/ off
- Specifying the brightness of the touch screen, LEDs, channel name displays, and lamps
- Setting the date and time of the internal clock
- Setting the network address
- Setting up the Dante audio network
- Using GPI (General Purpose Interface)
- Help function
- Other functions
- Initializing the unit to factory default settings
- Adjusting the detection point of the touch screen (Calibration function)
- Adjusting the faders (Calibration function)
- Fine-tuning the input and output gain (Calibration function)
- Adjusting the LED color (Calibration function)
- Adjusting the brightness of the channel name display
- Adjusting the contrast of the channel name display
- Initializing the Dante audio network settings
- Update procedure for NAME SUB CPU firmware
- Update function to Dante firmware
- Warning/Error Messages
- Index
- Data List
- Contents
- EQ Library List
- DYNAMICS Library List
- Dynamics Parameters
- Effect Type List
- Effects Parameters
- Premium Rack Processor Parameters
- Parameters that can be assigned to control changes
- NRPN parameter assignments
- Mixing parameter operation applicability
- MIDI Data Format
- Input/Output Specifications
- Electrical characteristics
- Mixer Basic Parameters
- Pin Assignment Chart
- MIDI Implementation Chart
Contents
Reference Manual
3
I/O devices and external head amps .................................... 158
Using an I/O device ............................................................................................. 158
Remotely controlling an R series unit ................................................................... 161
Third-party equipment’s HA control function....................................................... 165
Remotely controlling an amp............................................................................... 167
Remotely controlling WIRELESS unit..................................................................... 167
Using an external head amp ................................................................................ 170
Remotely controlling an external head amp......................................................... 172
Controlling an internal head amp ........................................................................ 174
MIDI....................................................................................... 175
MIDI functionality on the QL series console ......................................................... 175
Basic MIDI settings .............................................................................................. 175
Using program changes to recall scenes and library items.................................... 178
Using control changes to control parameters....................................................... 180
Using parameter changes to control parameters .................................................. 182
Recorder................................................................................ 183
About the USB memory recorder ......................................................................... 183
Assigning channels to the input/output of the recorder ....................................... 183
Recording audio to a USB flash drive.................................................................... 185
Playing back audio files from a USB flash drive ..................................................... 187
Editing the title list............................................................................................... 188
Recording or playing back using a computer DAW .............................................. 189
Using the QL console with Nuendo Live .............................................................. 192
Setup ..................................................................................... 196
About the SETUP screen....................................................................................... 196
User settings ........................................................................................................ 199
Preferences .......................................................................................................... 206
USER DEFINED keys ............................................................................................. 208
Functions that can be assigned to USER DEFINED keys ........................................ 209
USER DEFINED knobs........................................................................................... 214
Functions that can be assigned to
USER DEFINED knobs................................................................................ 215
Custom fader bank .............................................................................................. 216
Console Lock ....................................................................................................... 218
Saving and loading setup data to and from a USB flash drive............................... 219
Remount function to USB flash drives .................................................................. 226
Word clock and slot settings ................................................................................ 226
Using cascade connections .................................................................................. 228
Basic settings for MIX buses and MATRIX buses ................................................... 232
Switching the entire phantom power supply on/off ............................................. 233
Specifying the brightness of the touch screen, LEDs, channel name displays,
and lamps ................................................................................................. 233
Setting the date and time of the internal clock ..................................................... 234
Setting the network address ................................................................................. 234
Setting up the Dante audio network..................................................................... 235
Using GPI (General Purpose Interface) .................................................................. 246
Help function......................................................................... 251
Loading a Help/text file from a USB flash drive ..................................................... 251
Viewing Help........................................................................................................ 251
Using USER DEFINED keys to recall Help directly................................................... 252
Other functions ..................................................................... 253
Initializing the unit to factory default settings ....................................................... 253
Adjusting the detection point of the touch screen (Calibration function) .............. 253
Adjusting the faders (Calibration function) ........................................................... 254
Fine-tuning the input and output gain (Calibration function) ............................... 254
Adjusting the LED color (Calibration function) ...................................................... 256
Adjusting the brightness of the channel name display .......................................... 256
Adjusting the contrast of the channel name display.............................................. 257
Initializing the Dante audio network settings ........................................................ 257
Update procedure for NAME SUB CPU firmware................................................... 257
Update function to Dante firmware ...................................................................... 258
Warning/Error Messages ...................................................... 259
Index...................................................................................... 262