manual
Table Of Contents
- How to Use This Reference Manual
- Contents
- Function Tree
- SELECTED CHANNEL section
- Channel Strip section
- Input and output patching
- Input channels
- Signal flow for input channels
- Specifying the channel name, icon, and channel color
- Making HA (Head Amp) settings
- Sending the signal from an input channel to the STEREO/MONO bus
- Added pan function (Monaural input channels only)
- Sending a signal from an input channel to a MIX/ MATRIX bus
- Channel name display indication
- Correcting delay between channels (Input Delay)
- Surround output for input channels
- Channel library operations
- OUTPUT channels
- Signal flow for output channels
- Specifying the channel name, icon, and channel color
- Sending signals from MIX channels to the STEREO/ MONO bus
- Sending signals from MIX channels and STEREO/ MONO channels to MATRIX buses
- Correcting delay between channels (Output Delay)
- Using the PORT TO PORT function
- Channel library operations
- EQ and Dynamics
- Channel Job
- Scene memory
- Monitor and Cue functions
- Talkback and Oscillator
- Meters
- Graphic EQ, Parametric EQ, effects, and Premium Rack
- I/O devices and external head amps
- MIDI
- Recorder
- Setup
- About the SETUP screen
- User settings
- Preferences
- USER DEFINED keys
- Functions that can be assigned to USER DEFINED keys
- USER DEFINED knobs
- Functions that can be assigned to USER DEFINED knobs
- Custom fader bank
- Console Lock
- Saving and loading setup data to and from a USB flash drive
- Remount function to USB flash drives
- Word clock and slot settings
- Using cascade connections
- Basic settings for MIX buses and MATRIX buses
- Switching the entire phantom power supply on/ off
- Specifying the brightness of the touch screen, LEDs, channel name displays, and lamps
- Setting the date and time of the internal clock
- Setting the network address
- Setting up the Dante audio network
- Using GPI (General Purpose Interface)
- Help function
- Other functions
- Initializing the unit to factory default settings
- Adjusting the detection point of the touch screen (Calibration function)
- Adjusting the faders (Calibration function)
- Fine-tuning the input and output gain (Calibration function)
- Adjusting the LED color (Calibration function)
- Adjusting the brightness of the channel name display
- Adjusting the contrast of the channel name display
- Initializing the Dante audio network settings
- Update procedure for NAME SUB CPU firmware
- Update function to Dante firmware
- Warning/Error Messages
- Index
- Data List
- Contents
- EQ Library List
- DYNAMICS Library List
- Dynamics Parameters
- Effect Type List
- Effects Parameters
- Premium Rack Processor Parameters
- Parameters that can be assigned to control changes
- NRPN parameter assignments
- Mixing parameter operation applicability
- MIDI Data Format
- Input/Output Specifications
- Electrical characteristics
- Mixer Basic Parameters
- Pin Assignment Chart
- MIDI Implementation Chart
Function Tree
Reference Manual
4
Function Tree
Page numbers in parentheses ( ) are the page numbers of the
Owner’s Manual (booklet).
Main
SELECTED CHANNEL 6
OVERVIEW 12
FUNCTION ACCESS AREA (17)
CHANNEL PARAMETER
PATCH/NAME 17, 26, 50
GAIN/PATCH 28
1ch 28
8ch 29
CH1–32 31
CH33–64/ST IN 31
OUTPUT
Indication only
INPUT DELAY 41
8ch 41
CH1–32 42
CH33–64/ST IN 42
DELAY SCALE 41
INSERT/DIRECT OUT 20
1ch 20, 23
8ch 21, 23
HPF/EQ 58
1ch 58
8ch 60
CH1–32 61
CH33–64/ST IN 61
OUTPUT 61
DYNAMICS 62
1ch 62
KEY IN SOURCE SELECT 63
8ch 63
CH1–32 64
CH33–64/ST IN 64
OUTPUT 64
MIX SEND/MATRIX SEND 40
TO STEREO/MONO 51
8ch 51
CH1–32 52
CH33–64/ST IN 52
OUTPUT 52
SURROUND 44
LIBRARY
CHANNEL LIBRARY 48
EQ LIBRARY 64
DYNAMICS LIBRARY 64
GEQ/PEQ LIBRARY 157
EFFECT LIBRARY 157
Portico5033/Portico5043/U76/Opt-2A/
EQ-1A/DynamicEQ/Buss Comp 369/MBC4
LIBRARY
157
DANTE INPUT PATCH LIBRARY 159
RACK
VIRTUAL RACK 126
RACK MOUNTER 129
GEQ EDIT 130
GEQ LINK 130
EFFECT RACK 140
EFFECT EDIT 140
EFFECT TYPE 141
PREMIUM RACK 146
PREMIUM RACK MOUNTER 147
PREMIUM RACK EDIT 148
AUTOMIXER 136
PARAMETRIC EQ 133
I/O DEVICE
DANTE PATCH 158
DANTE SETUP 158
DANTE INPUT PATCH 159
DANTE OUTPUT PATCH 160
I/O 161
REMOTE HA EDIT 166
DANTE OUTPUT PATCH 160
AMP 167
DANTE OUTPUT PATCH 160
WIRELESS 168
EXTERNAL HA 172
EXTERNAL HA PORT SELECT 173
EXTERNAL HA EDIT 173
INTERNAL HA 174
MONITOR
MONITOR 101
CUE 110
MONITOR 103
OSCILLATOR 118
TALKBACK 116
METER
INPUT METER 120
OUTPUT METER 120
RTA METER 122
SETUP
USER SETUP 196
PREFERENCE 206
USER DEFINED KEYS SETUP 208
USER DEFINED KEY SETUP (List) 208
USER DEFINED KNOBS SETUP 214
USER DEFINED KNOB SETUP (List) 214
CUSTOM FADER BANK/MASTER FADER 217
FADER ASSIGN SELECT 216
USER LEVEL/CREATE USER KEY 199
CREATE KEY 200
SAVE KEY 203
LOGIN 201