manual

EQ and Dynamics

Reference Manual

HPF/EQ window (CH1–32, CH33–64/ST IN (QL5), ST IN (QL1),

OUTPUT)

This window displays the corresponding input channels (or output channels) simultaneously.

This window is only for display, and does not allow the parameters to be edited. It is useful

when you need to quickly check multiple EQ settings, or when you want to copy and paste EQ

settings between distant channels.

1 Channel select button

Selects the channel that you want to control in the SELECTED CHANNEL section. The

current channel icon, number, and color appear on the button.

2 EQ graph

This field graphically indicates the approximate response of the EQ and filters.

Using dynamics

Input channels feature two dynamics processors; output channels feature one dynamics

processor.

NOTE

• The DYNAMICS 1/2 field on the OVERVIEW screen displays the dynamics on/off status and the

amount of gain reduction.

• Dynamics settings can be saved and recalled at any time using the dedicated library. You can

also take advantage of a wide variety of presets suitable for various instruments or situations.

• You can also access the SELECTED CHANNEL VIEW screen, and use the knobs in the

SELECTED CHANNEL section to edit the dynamics settings on page 9.

• Even when the DYNAMICS 1/2 window is displayed, you can use the knobs in the SELECTED

CHANNEL section to control the dynamics.

STEP

1. Use the Bank Select keys and the [SEL] keys to select the channel for which you want

to control the dynamics.

Press the THRESHOLD knob in the DYNAMICS1/DYNAMICS2 field in the SELECTED

CHANNEL VIEW screen.

3. Press the 1 ch tab in the DYNAMICS1/2 window.

4. Press the DYNAMICS ON button, and adjust the dynamics parameters.

SELECTED CHANNEL

VIEW screen

DYNAMICS1/2 window