manual

Scene memory

Reference Manual

Using the Focus Recall function

“Focus Recall” is a function that lets you specify the scene parameters that will be recalled

(loaded) when you recall a scene. You can specify these settings for each scene. This function

is useful if you want to recall only the input channel settings of a specific scene.

NOTE

In contrast to Focus, the QL series console also features a “Recall Safe” function that enables

you to exclude specific channels and parameters from recall operations. However, while the

Focus Recall function is specified individually for each scene, the Recall Safe settings are applied

to all scenes.

NOTE

• The FOCUS field enables you to make settings for the Focus function. The buttons in this field

correspond to the scene list shown on the left side of the SCENE LIST window.

• Scenes for which Focus settings are made are indicated by a “FOCUS” indication in the STATUS

field of the SCENE LIST window.

• You can use the Focus function in conjunction with the Recall Safe function. Channels or

parameters that are excluded from Recall operations by either Focus or Recall Safe will not be

recalled.

• For FOCUS RECALL, the NAME parameter is included in the DCA indicator.

SCENE LIST window

1 FOCUS button

Enables or disables the Focus function for each scene.

2 SET popup button

Press this button to access the FOCUS RECALL popup window, which allows you to

select the parameters that will be subject to recall.

3 FOCUS PARAMETER indicators

These indicators show the focus recall settings that are specified for each scene.

4 CURRENT SETTING field

Specifies the content that will be saved by the next scene store operation.

STEP

1. Press the SCENE field in the Function Access Area.

2. Press the FOCUS tab at the bottom of the SCENE LIST window.

3. In the SCENE LIST window, press the SET button for the scene you want to set.

4. Follow the procedure starting with step 3 in the “Using the Recall Safe function” on

page 70 to make settings.

5. Recall a scene for which you have made Focus Recall settings.

SCENE field SCENE LIST window

1 2