Owner's Manual
Table Of Contents
- Contents
- PRECAUTIONS
- Introduction
- An overview of the QL series
- Controls and functions
- Touch screen
- Basic operation of the QL series
- Connection
- Quick Guide
- Connecting the devices
- Setting the input channels
- Sending an input channel signal to the STEREO bus
- Applying EQ/dynamics
- Setting the output channels
- Using GEQ
- Using Automixer
- Applying effects
- Changing the patch settings
- Grouping and linking
- Using talkback
- Routing the oscillator to an output channel
- Using scene memories
- Recording and playing audio using a USB flash drive
- Saving and loading the unit settings
- Other functions
- Troubleshooting
- Attaching the RK1 rackmount kit (sold separately)
- General specifications
- Dimensional Diagrams
- Index
- Block Diagram
- Level Diagram
Quick Guide
Owner’s Manual
40
8. In the Channel Strip section, select the bank that
includes the channel for the premium rack you
want to use.
9. Press the [SEL] key of the channel for the
premium rack you want to use.
10. Press the RACK EDIT button in the INSERT field
in the SELECTED CHANNEL VIEW screen.
11. Adjust the parameters in the PREMIUM RACK
window.
Changing the patch settings
Setting up INSERT or DIRECT OUT
1. Select the bank that contains the channel for
which you want to set up INSERT or DIRECT OUT
in the Channel Strip section.
2. Press the [SEL] key of the channel for which you
want to change the patching.
3. Press the popup button in the DIRECT OUT field
in the SELECTED CHANNEL VIEW screen.
4. Assign OUT and IN for INSERT or DIRECT OUT.
5. Press the ON button to enable it.
6. Modify the INSERT or DIRECT OUT point by
pressing it, if necessary.
Changing the signal output to each
output port
1. Press the SETUP button in the touch screen.
2. Press the OUTPUT PORT button in SYSTEM
SETUP.
3. Select the OUTPUT PORT tab you want to
change.