Owner`s manual
Table Of Contents
- How to Use This Reference Manual
- Contents
- Function Tree
- SELECTED CHANNEL section
- Channel Strip section
- Input and output patching
- Input channels
- Signal flow for input channels
- Specifying the channel name, icon, and channel color
- Making HA (Head Amp) settings
- Sending the signal from an input channel to the STEREO/MONO bus
- Sending a signal from an input channel to a MIX/ MATRIX bus
- Correcting delay between channels (Input Delay)
- Channel library operations
- OUTPUT channels
- Signal flow for output channels
- Specifying the channel name, icon, and channel color
- Sending signals from MIX channels to the STEREO/ MONO bus
- Sending signals from MIX channels and STEREO/ MONO channels to MATRIX buses
- Correcting delay between channels (Output Delay)
- Using the PORT TO PORT function
- Channel library operations
- EQ and Dynamics
- Channel Job
- Scene memory
- Monitor and Cue functions
- Talkback and Oscillator
- Meters
- Graphic EQ, effects, and Premium Rack
- I/O devices and external head amps
- MIDI
- Recorder
- Setup
- About the SETUP screen
- User settings
- Preferences
- USER DEFINED keys
- Functions that can be assigned to USER DEFINED keys
- USER DEFINED knobs
- Functions that can be assigned to USER DEFINED knobs
- Custom fader bank
- Console Lock
- Saving and loading setup data to and from a USB flash drive
- Word clock and slot settings
- Using cascade connections
- Basic settings for MIX buses and MATRIX buses
- Switching the entire phantom power supply on/ off
- Specifying the brightness of the touch screen, LEDs, channel name displays, and lamps
- Setting the date and time of the internal clock
- Setting the network address
- Setting up the Dante audio network
- Using GPI (General Purpose Interface)
- Help function
- Other functions
- Initializing the unit to factory default settings
- Adjusting the detection point of the touch screen (Calibration function)
- Adjusting the faders (Calibration function)
- Fine-tuning the input and output gain (Calibration function)
- Adjusting the LED color (Calibration function)
- Adjusting the brightness of the channel name display
- Adjusting the contrast of the channel name display
- Initializing the Dante audio network settings
- Warning/Error Messages
- Index
- Data List
- EQ Library List
- DYNAMICS Library List
- Dynamics Parameters
- Effect Type List
- Effects Parameters
- Premium Rack Processor Parameters
- Parameters that can be assigned to control changes
- NRPN parameter assignments
- Mixing parameter operation applicability
- MIDI Data Format
- Input/Output Specifications
- Electrical characteristics
- Mixer Basic Parameters
- Pin Assignment Chart
- MIDI Implementation Chart
Contents
Reference Manual
2
Contents
How to Use This Reference Manual .......................................................................... 1
Function Tree ............................................................................ 4
SELECTED CHANNEL section ...................................................... 6
Operations in the SELECTED CHANNEL section ....................................................... 6
Channel Strip section.............................................................. 11
Operations in the Channel Strip section................................................................. 11
Input and output patching..................................................... 14
Changing the input patch settings......................................................................... 15
Changing the output patch settings ...................................................................... 16
Inserting an external device into a channel ............................................................ 18
Directly outputting an INPUT channel ................................................................... 21
Input channels ........................................................................ 23
Signal flow for input channels................................................................................ 23
Specifying the channel name, icon, and channel color........................................... 24
Making HA (Head Amp) settings............................................................................ 26
Sending the signal from an input channel to the STEREO/MONO bus ................... 30
Sending a signal from an input channel to a MIX/MATRIX bus .............................. 34
Correcting delay between channels (Input Delay).................................................. 37
Channel library operations..................................................................................... 39
OUTPUT channels.................................................................... 40
Signal flow for output channels ............................................................................. 40
Specifying the channel name, icon, and channel color........................................... 41
Sending signals from MIX channels to the STEREO/MONO bus ............................. 42
Sending signals from MIX channels and STEREO/MONO channels to
MATRIX buses............................................................................................. 44
Correcting delay between channels (Output Delay)............................................... 46
Using the PORT TO PORT function ........................................................................ 47
Channel library operations..................................................................................... 48
EQ and Dynamics .................................................................... 49
Using EQ ............................................................................................................... 49
Using dynamics ..................................................................................................... 52
Using the EQ or Dynamics libraries ........................................................................ 55
Channel Job ............................................................................. 56
DCA group............................................................................................................. 56
Mute group............................................................................................................ 58
Using the Recall Safe function................................................................................. 61
Channel Link function ............................................................................................ 64
Copying, moving, or initializing a channel.............................................................. 67
Scene memory ......................................................................... 71
Storing and recalling scenes ................................................................................... 72
Editing scene memories.......................................................................................... 75
Using the Global Paste function.............................................................................. 78
Using the Focus Recall function .............................................................................. 80
Using the Fade function.......................................................................................... 82
Outputting a control signal to an external device in tandem with scene recall
(GPI OUT) ................................................................................................... 83
Playing back an audio file that links to a scene recall............................................... 84
Using Preview mode............................................................................................... 86
Monitor and Cue functions ..................................................... 87
Using the Monitor function .................................................................................... 88
Using the Cue function........................................................................................... 91
Talkback and Oscillator........................................................... 96
Using Talkback ....................................................................................................... 96
Using the Oscillator function .................................................................................. 98
Meters.................................................................................... 101
Operations in the METER screen ........................................................................... 101
Graphic EQ, effects, and Premium Rack................................ 103
About the virtual rack ........................................................................................... 103
Virtual rack operations .......................................................................................... 103
Graphic EQ operations ......................................................................................... 106
About AUTOMIXER............................................................................................... 109
Editing the internal effects .................................................................................... 112
Effects and tempo synchronization ....................................................................... 117
Using the Premium Rack....................................................................................... 119
Using the graphic EQ, effect, and Premium Rack libraries ..................................... 126