Owner`s manual
Table Of Contents
- How to Use This Reference Manual
- Contents
- Function Tree
- SELECTED CHANNEL section
- Channel Strip section
- Input and output patching
- Input channels
- Signal flow for input channels
- Specifying the channel name, icon, and channel color
- Making HA (Head Amp) settings
- Sending the signal from an input channel to the STEREO/MONO bus
- Sending a signal from an input channel to a MIX/ MATRIX bus
- Correcting delay between channels (Input Delay)
- Channel library operations
- OUTPUT channels
- Signal flow for output channels
- Specifying the channel name, icon, and channel color
- Sending signals from MIX channels to the STEREO/ MONO bus
- Sending signals from MIX channels and STEREO/ MONO channels to MATRIX buses
- Correcting delay between channels (Output Delay)
- Using the PORT TO PORT function
- Channel library operations
- EQ and Dynamics
- Channel Job
- Scene memory
- Monitor and Cue functions
- Talkback and Oscillator
- Meters
- Graphic EQ, effects, and Premium Rack
- I/O devices and external head amps
- MIDI
- Recorder
- Setup
- About the SETUP screen
- User settings
- Preferences
- USER DEFINED keys
- Functions that can be assigned to USER DEFINED keys
- USER DEFINED knobs
- Functions that can be assigned to USER DEFINED knobs
- Custom fader bank
- Console Lock
- Saving and loading setup data to and from a USB flash drive
- Word clock and slot settings
- Using cascade connections
- Basic settings for MIX buses and MATRIX buses
- Switching the entire phantom power supply on/ off
- Specifying the brightness of the touch screen, LEDs, channel name displays, and lamps
- Setting the date and time of the internal clock
- Setting the network address
- Setting up the Dante audio network
- Using GPI (General Purpose Interface)
- Help function
- Other functions
- Initializing the unit to factory default settings
- Adjusting the detection point of the touch screen (Calibration function)
- Adjusting the faders (Calibration function)
- Fine-tuning the input and output gain (Calibration function)
- Adjusting the LED color (Calibration function)
- Adjusting the brightness of the channel name display
- Adjusting the contrast of the channel name display
- Initializing the Dante audio network settings
- Warning/Error Messages
- Index
- Data List
- EQ Library List
- DYNAMICS Library List
- Dynamics Parameters
- Effect Type List
- Effects Parameters
- Premium Rack Processor Parameters
- Parameters that can be assigned to control changes
- NRPN parameter assignments
- Mixing parameter operation applicability
- MIDI Data Format
- Input/Output Specifications
- Electrical characteristics
- Mixer Basic Parameters
- Pin Assignment Chart
- MIDI Implementation Chart
Data List
22
Parameters that can be assigned to control changes
Mode Parameter 1 Parameter 2
NO ASSIGN — 0
FADER H
INPUT
CH 1–CH 64
*1
STIN1L–STIN8R
OUTPUT
MIX 1–MIX 16
MATRIX 1–MATRIX 8
STEREO L–MONO(C)
FADER L
INPUT
CH 1–CH 64
*1
STIN1L–STIN8R
OUTPUT
MIX 1–MIX 16
MATRIX 1–MATRIX 8
STEREO L–MONO(C)
CH ON
INPUT
CH 1–CH 64
*1
STIN1L–STIN8R
OUTPUT
MIX 1–MIX 16
MATRIX 1–MATRIX 8
STEREO L–MONO(C)
PHASE INPUT
CH 1–CH 64
*1
STIN1L–STIN8R
INSERT
INPUT
CH 1–CH 64
*1
OUTPUT
MIX 1–MIX 16
MATRIX 1–MATRIX 8
STEREO L–MONO(C)
DIRECT OUT ON
CH 1–CH 64
*1
PAN/BALANCE INPUT
CH 1–CH 64
*1
STIN1L–STIN8R
BALANCE OUTPUT
MIX 1–MIX 16
MATRIX 1–MATRIX 8
STEREO L–STEREO R
TO STEREO ON
CH 1–CH 64
*1
STIN1L–STIN8R
TO MONO ON
CH 1–CH 64
*1
STIN1L–STIN8R
LCR
ON
CH 1–CH 64
*1
STIN1L–STIN8R
MIX 1–MIX 16
CSR
MIX/MATRIX SEND
MIX 1 ON – MIX 16 ON
CH 1–CH 64
*1
STIN1L–STIN8R
MATRIX 1 ON – MATRIX 8 ON
MIX 1 POINT – MIX 16 POINT
MATRIX 1 POINT – MATRIX 8 POINT
MIX 1 LEVEL H – MIX 16 LEVEL H
MIX 1 LEVEL L – MIX 16 LEVEL L
MATRIX 1 LEVEL H – MATRIX 8 LEVEL H
MATRIX 1 LEVEL L – MATRIX 8 LEVEL L
MIX 1/2 PAN – MIX 15/16 PAN
MATRIX1/2 PAN – MATRIX7/8 PAN
MIX TO STEREO
TO STEREO ON
MIX 1–MIX 16TO MONO ON
PAN
MIX TO MATRIX
MATRIX 1 POINT – MATRIX 8 POINT
MIX 1–MIX 16
MATRIX 1 ON – MATRIX 8 ON
MATRIX 1 LEVEL H – MATRIX 8 LEVEL H
MATRIX 1 LEVEL L – MATRIX 8 LEVEL L
MATRIX 1/2 PAN – MATRIX 7/8 PAN
STEREO TO MATRIX
MATRIX 1 POINT – MATRIX 8 POINT
STEREO L–MONO(C)
MATRIX 1 ON – MATRIX 8 ON
MATRIX 1 LEVEL H – MATRIX 8 LEVEL H
MATRIX 1 LEVEL L – MATRIX 8 LEVEL L
MATRIX 1/2 PAN – MATRIX 7/8 PAN
INPUT EQ
ON
CH 1–CH 64
*1
STIN1L–STIN8R
LOW Q
LOW FREQ
LOW GAIN
LOW MID Q
LOW MID FREQ
LOW MID GAIN
HIGH MID Q
HIGH MID FREQ
HIGH MID GAIN
HIGH Q
HIGH FREQ
HIGH GAIN
LPF ON
LOW TYPE
HIGH TYPE
HPF TYPE
INPUT ATT INPUT
CH 1–CH 64
*1
STIN1L–STIN8R
INPUT HPF
ON
CH 1–CH 64
*1
STIN1L–STIN8R
FREQ
Mode Parameter 1 Parameter 2