Owner`s manual
Table Of Contents
- How to Use This Reference Manual
- Contents
- Function Tree
- SELECTED CHANNEL section
- Channel Strip section
- Input and output patching
- Input channels
- Signal flow for input channels
- Specifying the channel name, icon, and channel color
- Making HA (Head Amp) settings
- Sending the signal from an input channel to the STEREO/MONO bus
- Sending a signal from an input channel to a MIX/ MATRIX bus
- Correcting delay between channels (Input Delay)
- Channel library operations
- OUTPUT channels
- Signal flow for output channels
- Specifying the channel name, icon, and channel color
- Sending signals from MIX channels to the STEREO/ MONO bus
- Sending signals from MIX channels and STEREO/ MONO channels to MATRIX buses
- Correcting delay between channels (Output Delay)
- Using the PORT TO PORT function
- Channel library operations
- EQ and Dynamics
- Channel Job
- Scene memory
- Monitor and Cue functions
- Talkback and Oscillator
- Meters
- Graphic EQ, effects, and Premium Rack
- I/O devices and external head amps
- MIDI
- Recorder
- Setup
- About the SETUP screen
- User settings
- Preferences
- USER DEFINED keys
- Functions that can be assigned to USER DEFINED keys
- USER DEFINED knobs
- Functions that can be assigned to USER DEFINED knobs
- Custom fader bank
- Console Lock
- Saving and loading setup data to and from a USB flash drive
- Word clock and slot settings
- Using cascade connections
- Basic settings for MIX buses and MATRIX buses
- Switching the entire phantom power supply on/ off
- Specifying the brightness of the touch screen, LEDs, channel name displays, and lamps
- Setting the date and time of the internal clock
- Setting the network address
- Setting up the Dante audio network
- Using GPI (General Purpose Interface)
- Help function
- Other functions
- Initializing the unit to factory default settings
- Adjusting the detection point of the touch screen (Calibration function)
- Adjusting the faders (Calibration function)
- Fine-tuning the input and output gain (Calibration function)
- Adjusting the LED color (Calibration function)
- Adjusting the brightness of the channel name display
- Adjusting the contrast of the channel name display
- Initializing the Dante audio network settings
- Warning/Error Messages
- Index
- Data List
- EQ Library List
- DYNAMICS Library List
- Dynamics Parameters
- Effect Type List
- Effects Parameters
- Premium Rack Processor Parameters
- Parameters that can be assigned to control changes
- NRPN parameter assignments
- Mixing parameter operation applicability
- MIDI Data Format
- Input/Output Specifications
- Electrical characteristics
- Mixer Basic Parameters
- Pin Assignment Chart
- MIDI Implementation Chart
Function Tree
Reference Manual
5
NOTE
• The explanations in this reference manual will use the QL5.
• In the case of the QL1, some screens will not show channels
and faders that do not exist on those models.
MIDI/GPI 138, 203
MIDI SETUP 139
PROGRAM CHANGE 141
CONTROL CHANGE 144
GPI 204
FADER START 206
BUS SETUP 189
CONSOLE LOCK 176
DATE/TIME 191
NETWORK 192
DANTE SETUP 192
SCENE
SCENE LIST 73
GLOBAL PASTE 78
FADE TIME 82
SONG SELECT 85
FOCUS RECALL 81
PREVIEW 86
RECORDER
USB 146
NUENDO LIVE 155
CH JOB
CH LINK MODE 65
DCA GROUP ASSIGN 57
MUTE GROUP ASSIGN 59
RECALL SAFE MODE 61
CH COPY MODE 68
CH MOVE MODE 69
CH DEFAULT MODE 70
SETUP PATCH
PORT SELECT
20, 22, 28, 91,
95, 128, 136, 188
CH SELECT 17, 104, 147, 175
Others
CONFIRMATION 167
SOFT KEYBOARD (23)
LOGIN 163
Startup Menu
MODE SELECT 210
INITIALIZE ALL MEMORIES 210
INITIALIZE CURRENT MEMORIES 210
TOUCH SCREEN CALIBRATION 210
INPUT PORT TRIM 212
OUTPUT PORT TRIM 212
SLOT OUTPUT TRIM 212
FADER CALIBRATION 211
CHANNEL COLOR CALIBRATION 213