Product manual

PHONES SELECT SWITCH

You can plug a set of headphones into the PHONES jack on the front panel to monitor the sound. The PHONES

SELECT Switch is used to select the signal to be monitored. Control the volume level with the PHONES volume

control .

STEREO Position:

Put the switch in this position to monitor the signal output through the ST OUT jacks .

The Left and Right chan-

nels of the stereo signal will be heard through the headphones.

When set to this position during ping-ponging or mixdown operations, the mixed signal of all the instruments can

be monitored.

MONITOR Position:

This position is for monitoring the signal of each track. You can freely monitor while mixing the sound of each

track during recording or playback. Using the MONITOR LEVEL Controls

set the desired level for each track.

MIX Position:

This position allows you to simultaneously monitor

both the sound heard in the STEREO position and the

sound heard in the MONITOR position. Setting to this

position during punch-in/punch-out operations will

enable the type of monitoring shown below. (Refer to

“Punch-in/Punch-out” on page 27).

For

example,

when adding in instruments or vocals in the following

way:

For retake

The sound of

Tracks 1-3

tracks 1-4 plus the

plus the sound

sound of the

of the material

material

to be added.

added.