Product manual

GENERAL SPECIFICATIONS
TRANSPORT
Tape type
Heads
Tape speeds
Pitch control
Wow & flutter
fast wind
Motor
CONNECTORS
Inputs 1, 2:
Input impedance
Rated input level
Max. input level
Min. input level
Inputs 3 ~ 6:
Input impedance
Rated input level
Min. input level
Aux return L, R: Input impedance
Rated input level
Min. input level
Stereo L, R:
Output impedance
Load impedance
Rated output level
Phones out:
Load impedance
Max. output level
Tape out 1—4: Output impedance
Load impedance
Rated output level
Aux send:
Output impedance
Load impedance
Rated output level
ELECTRICAL SPECIFICATIONS
Equalizer
Frequency responser
S/N ratio
Distortion
Channel separation
Erasure ratio
Noise reduction
OTHERS
Power supply
Power consumption
Dimensions (W x H x D)
Weight
*dbx is a trademark of dbx Incorporated.
All specifications subject to change without notice.
Chrome (70 microsec. EQ)
4-channel Permalloy rec/play 4-channel ferrite erase
4.8 cm/sec, 9.5 cm/sec
±10%
Less than 0.05% WRMS
Approx 100 sec, for C-60 tape
DC servo
10 k-ohms
- 10 to - 50 dB (fader nominal)
+ 10 dB (trim min.)
- 56 dB (trim, fader max.)
10 k-ohms
- 10 dB (fader nominal)
- 16 dB (fader max.)
10 k-ohms
- 10 dB (fader nominal)
- 16 dB (fader max.)
1 k-ohm
Greater than 10 k-ohms
- 10 dB into 50 k-ohms
8—40 ohms
100 mW + 100 mW
1 k-ohm
Greater than 10 k-ohms
- 10 dB into 50 k-ohms
1 k-ohm
Greater than 10 k-ohms
- 10 dB into 50 k-ohms
HIGH: ± 10 dB at 10 kHz (shelving)
LOW: ± 10 dB at 100 Hz (shelving)
40 Hz~18 kHz,
± 3 dB at 9.5 cm/sec
40 Hz~12.5 kHz, ± 3 dB at 4.8 cm/sec
85 dB, dbx ON, IHF-A
Less than 1%, EIAJ 315 Hz
Greater than 55 dB at 1 kHz
Greater than 70 dB at 1 kHz
dbx*
U.S. & Canadian Models: 120V, 50 Hz
General Model: 110/120/220/240V, 50/60 HZ
U.S. & Canadian models: 23W
General Model: 21W
413x75x260 mm (16-1/4x3x10-1/4")
3.5 kg (7.7 Ibs.)
37