Specifications

Programming the Sequencer Parts

1. Select a Part

Move the cursor to the pointer (▲) of the part you intend to record.

2. Engage the Real Time Record Mode

Press [ENTER] while holding the cursor up button to engage the real time

record mode. The following display will appear:

DETAIL

You can exit from the real time record mode without recording by

simply pressing the

[ENTER][ENTER]

[ENTER] button.

3. Set a Quantization Value, If Required

Quantization helps to produce a “tight” recording by automatically

aligning notes to the nearest specified beat as you record. To set a

quantization value, move the cursor down to the quantization parameter

and use the [-1] and [+1] buttons to set as required. No quantization is

applied when set to “OF”. Other settings align recorded notes to the

nearest corresponding beat.

08Orgn1

100

QuantOF

REC