User Manual

Connections
10 En
• Do not connect this unit or other components to the main power until all connections between components are complete.
• All connections must be correct: L (left) to L, R (right) to R, “+” to “+” and “–” to “–”. If the connections are faulty,
no sound will be heard from the speakers, and if the polarity of the speaker connections is incorrect, the sound will be
unnatural and lack bass. Refer to the owner’s manual for each of your components.
• Do not let bare speaker wires touch each other or any metal part of this unit. This could damage this unit and/or the speakers.
y
• The PHONO jacks are designed for connecting a turntable with an MM cartridge.
• Connect your turntable to the GND terminal to reduce noise in the signal. However, for some turntables, you may hear less noise
without the GND connection.
Connections
Connecting speakers and source components
CAUTION
Connecting recording devices
You can connect audio recording devices to the LINE 2-3 (REC) jacks. This jack output analog audio signals selected as the input.
• Be sure to use the LINE 2-3 (REC) jacks only for connecting recording devices.
• If you select LINE2 as the input source, the audio output of the LINE 2 (REC) jacks will be muted. If you select LINE3 as the
input source, the audio output of the LINE 3 (REC) jacks will be muted.
O C
Turntable
Audio
output
CD player
DVD player, etc.
GND
Speakers A
Subwoofer
Audio output
(digital coaxial)
Audio
input
Audio
output
Audio
output
Speakers B
CD recorder, etc.
Audio output
(digital optical)
CD player, etc.
Notes
PREPARATION