G Network Receiver Owner's Manual • The R-N803 and R-N803D network receivers allow you to play back sound in high-quality stereo at your own home. • This manual explains preparations and operations for everyday users of the unit.
English PRECAUTIONS PLEASE READ CAREFULLY BEFORE USE. BE SURE TO FOLLOW THESE INSTRUCTIONS. The precautions listed below are to prevent risk of harm to the user and others, as well as to prevent property damage, and to help the user use this unit properly and safely. Be sure to follow these instructions. After reading this manual, be sure to keep it in a safe place where it can be referenced at any time.
PRECAUTIONS CAUTION ■ Hearing loss • Do not use the unit/speakers or headphones for a long period of time at a high or uncomfortable volume level, since this can cause permanent hearing loss. If you experience any hearing loss or ringing in the ears, consult a physician. • Before connecting the unit to other devices, turn off the power for all devices. Also, before turning the power of all devices on or off, make sure that all volume levels are set to the minimum.
Notice and Information Notice Information Indicates points that you must observe in order to prevent product failure, damage or malfunction and data loss, as well as to protect the environment. Indicates information of note regarding this product. ■ Power • The illustrations and screens in this manual are for instructional purposes only. • The company names and product names in this manual are the trademarks or registered trademarks of their respective companies.
Contents Front panel ..................................................................... 4 Front display .................................................................. 6 Rear panel ...................................................................... 7 Remote control............................................................... 8 PREPARATION Connections ............................................................... 10 Connecting audio devices ............................................
INTRODUCTION What you can do with this unit This unit is a network receiver compatible with a network source such as a media server and mobile device. It supports playback from not only audio sources such as a CD player or radio, but also from Bluetooth devices and network streaming services.
Supplied accessories Check that the following accessories are supplied with the product. AM antenna (R-N803) FM antenna (R-N803) * Batteries (x2) (AA, R6, UM-3) DAB/FM antenna (R-N803D) One of the above is supplied depending on the region of purchase. YPAO microphone Power cord * The supplied power cord varies depending on the region of purchase.
Controls and functions Front panel 12 3 4 5 6 7 8 9 : A B C PURE DIRECT DIMMER DISPLAY MODE MEMORY CLEAR BAND PRESET TUNING VOLUME INPUT BASS BALANCE TREBLE LOUDNESS SELECT PUSH - ENTER FLAT PHONES SPEAKERS A B -30dB USB RETURN 5V CONNECT 1A YPAO MIC L 1 A (power) Turns on/off the unit.
INTRODUCTION Controls and functions PURE DIRECT DIMMER DISPLAY MODE MEMORY CLEAR BAND PRESET TUNING VOLUME INPUT BASS BALANCE TREBLE LOUDNESS SELECT PUSH - ENTER FLAT PHONES SPEAKERS A B -30dB USB RETURN 5V CONNECT 1A YPAO MIC L D E F G H I J D PHONES jack Outputs audio to your headphones for private listening. E YPAO MIC jack For connecting the supplied YPAO microphone (p. 42).
Controls and functions Front display 1 2 3 4 5 6 78 STEREO TUNED SLEEP YPAO VOL. A 9 B VOL. MUTE L R SW : : A B Note • If you turn on the power to the unit right after you purchase or initialize it, the unit will display “WAC” (Wireless Accessory Configuration) on the front display and trigger an automatic iOS device search. See “Sharing the iOS device setting” (p. 16) for details on the iOS device and network connection.
Controls and functions Rear panel 2 3 4 5 6 7 8 INTRODUCTION 1 NETWORK AC IN IN 1 1 IN 2 1 OPTICAL 2 2 COAXIAL ANTENNA OUT SPEAKERS FM AM IN PHONO A GND 3 75Ω OUT B LINE CD 12V 9 : TRIGGER SUBWOOFER OUT OUT 0.1A AB C (R-N803) 1 LINE 1-3 jacks For connecting to analog audio components (p. 10). 8 AC IN jack For connecting the supplied power cord (p. 14). 2 PHONO jacks For connecting to a turntable (p. 10). 9 CD jacks For connecting to a CD player, etc. (p. 10).
Controls and functions Remote control 1 Infrared signal transmitter 1 Sends infrared signals. 2 SPEAKERS A/B 2 SPEAKERS A A B PHONO SLEEP COAX 1 COAX 2 3 OPT 2 CD LINE 1 LINE 2 LINE 3 TUNER NET USB BAND 5 MEMORY 3 Input selection keys BLUETOOTH OPT 1 4 B Turns on and off the set of speakers connected to the SPEAKERS A and/or SPEAKERS B terminals on the rear panel of this unit when the corresponding key is pressed. Select an input source for playback.
Controls and functions A A (power) ■ Installing batteries Turns on/off (standby) the unit. INTRODUCTION Note The A (power) key on the remote control works only when the A (power) on the front panel is on. B SLEEP Sets the sleep timer (p. 24). C OPTION D MUTE Mutes the audio output. E Playback keys Let you play back and perform other operations for network sources, Bluetooth devices and USB devices. Note The playback keys may not work depending on the Bluetooth device.
PREPARATION Connections Connecting audio devices Make sure to connect L (left) to L, R (right) to R, “+” to “+” and “–” to “–”. If the connections are faulty, no sound will be heard from the speakers, and if the polarity of the speaker connections is incorrect, the sound will be unnatural and lack bass. Refer to the owner’s manual for each of your components. Make sure to use RCA cables, optical cables, or coaxial cables to connect audio components.
Connections Connecting the speakers CAUTION Connect the speakers with impedance as shown below. If you connect speakers with an excessively low impedance, this unit may overheat. You can change the speaker impedance setting of this unit in “SP. IMP” (p. 52) in the ADVANCED SETUP menu. Speaker impedance (SP IMP.
Connections ■ Bi-wire connection Bi-wire connection separates the woofer from the combined midrange and tweeter section. A bi-wire compatible speaker has four binding post terminals. These two sets of terminals allow the speaker to be split into two independent sections. With these connections, the mid and high frequency drivers are connected to one set of terminals and the low frequency driver to another set of terminals.
Connections Connecting the FM/AM antennas (R-N803) Connecting the DAB/FM antenna (R-N803D) Connect the supplied FM/AM antenna to this unit. Fix the end of the FM antenna to a wall, and place the AM antenna. Connect the supplied DAB/FM antenna to this unit and fix the antenna ends to a wall.
Connections Connecting the network cable Connecting the power cord Connect the unit to your router with a commerciallyavailable STP network cable (CAT-5 or higher straight cable). After all the connections are complete, connect the supplied power cord to this unit and then to an AC wall outlet. Note WARNING Use an STP (Shielded Twisted Pair) cable to prevent electromagnetic interference.
Connecting to network Connecting to network There are several methods to connect the unit to a network. Select a connection method according to your environment. Note WAC (Wireless Accessory Configuration) If you turn on the power to the unit right after you purchase or initialize it, the unit will automatically use the network settings of the iOS device (iPhone/iPad/iPod touch) and try to connect to a wireless LAN (unless the unit is already connected to a wired LAN).
Connecting to network ■ Connecting with the wired router You can connect to the network by simply making a wired LAN connection (p. 14) Connecting using the DHCP server function of the router Note • You can configure the network parameters (such as IP address) in “IP Address” (p. 49) in the “Setup” menu. • If you want to use a wired LAN connection when a wireless connection has been made, set “Connection” (p. 48) in the “Setup” menu to “Wired”.
Connecting to network 6 On the iOS device, select the unit as the AirPlay speaker in the Wi-Fi screen. Configuring with the router's WPS push button Example (iOS 10) You can easily set up a wireless connection with one push of the WPS button. Note This configuration does not work if the security method of your wireless router (access point) is WEP or WPA2-TKIP. In this case, use other connection method. Check the network currently selected and tap “Next”.
Connecting to network Set the wireless network connection manually Before performing the following procedure, check the security method and security key on the wireless router (access point). MEMORY PRESET j / i PRESET 9 Settings None, WEP, WPA2-PSK (AES), Mixed Mode Note If you select “None”, the connection may be insecure since the communication is not encrypted.
Connecting to network Using Wireless Direct, this unit can operate as a wireless network access point that mobile devices can directly connect to. MEMORY PRESET j / i PRESET Cursor keys B/C/D/E ENTER 7 Settings None, WPA2-PSK (AES) Note • If you select “None”, proceed to Step 10. • If you select “None”, the connection may be insecure since the communication is not encrypted.
Connecting to network Verify the network connection status Configuring MusicCast Perform the following procedure to verify the unit’s connection to a network. ■ About MusicCast MEMORY Cursor keys B / C ENTER PRESET ENTER HOME RETURN RETURN SETUP SETUP OPTION VOLUME NOW PLAYING 1 2 MUTE Press SETUP. Use the cursor keys (B / C) to select “Network” and press ENTER. Note Use MusicCast to share music between MusicCastcompatible devices in multiple rooms.
Connecting to network 2 Operate “MusicCast CONTROLLER” following the on screen instructions, then hold down CONNECT on the front panel of this unit for 5 seconds. CONNECT PREPARATION 3 Operate “MusicCast CONTROLLER” following the onscreen instructions to set up the network. This completes the MusicCast network registration and wireless network connection settings. Use “MusicCast CONTROLLER” to play back music. Note English • AirPlay and DSD sound cannot be transmitted.
BASIC OPERATION Playback Playing a source Switching information on the front display SPEAKERS SPEAKERS A/B A A (power) B PHONO SLEEP COAX 1 COAX 2 When you select a network source or USB as the input source, you can switch playback information on the front display.
Playback ■ Adjusting the BASS and TREBLE controls Front panel operations ■ Enjoying pure high fidelity sound (Pure Direct) PURE DIRECT PURE DIRECT DIMMER DISPLAY MODE MEMORY CLEAR BAND PRESET TUNING VOLUME INPUT BASS BALANCE TREBLE LOUDNESS SELECT PUSH - ENTER FLAT PHONES SPEAKERS A B -30dB USB RETURN 5V CONNECT 1A YPAO MIC L R Note • When the PURE DIRECT switch is turned on, the front display turns off.
Playback ■ Adjusting the LOUDNESS control PURE DIRECT DIMMER DISPLAY MODE MEMORY CLEAR BAND PRESET TUNING VOLUME INPUT BASS BALANCE TREBLE LOUDNESS SELECT PUSH - ENTER FLAT PHONES SPEAKERS A B -30dB USB RETURN 5V CONNECT 1A Using the sleep timer Use this feature to automatically set this unit to standby mode after a certain amount of time. The sleep timer is useful when you are going to sleep while this unit is playing or recording a source.
Listening to FM/AM radio Listening to FM/AM radio ■ Improving FM reception (FM mode) Note If the signal from the station is weak and the sound quality is not good, set the FM band reception mode to monaural mode to improve reception. R-N803D does not include an AM tuner.
Listening to FM/AM radio LINE 1 LINE 2 LINE 3 TUNER NET USB ■ Registering a radio station manually BAND TUNING TUNER BAND MEMORY TUNING BAND MEMORY PRESET MEMORY PRESET j / i PRESET j / i PRESET ENTER Cursor keys B / C ENTER ENTER HOME RETURN RETURN HOME RETURN SETUP RETURN SETUP OPTION OPTION VOLUME NOW PLAYING MUTE 1 Press TUNER to select “TUNER” as the input source. 2 Press OPTION on the remote control. The “Option” menu is displayed (p. 46).
Listening to FM/AM radio 4 ■ Recalling a preset station You can recall preset stations that were registered using automatic station preset or manual station preset. CLEAR B PHONO VOL. BLUETOOTH OPT 1 OPT 2 CD LINE 1 LINE 2 LINE 3 TUNER NET USB If the preset station is cleared, “Cleared” appears and then the next in-use preset number is displayed. CLEAR TUNER A VOL. 01:Cleard TUNING PRESET PRESET j / i 5 Repeat step 4 until all desired preset stations are cleared.
Listening to FM/AM radio Radio Data System tuning (U.K. and Europe models only) Radio Data System is a data transmission system used by FM stations in many countries. The unit can receive various types of Radio Data System data, such as “Program Service”, “Program Type,” “Radio Text” and “Clock Time”, when it is tuned into a Radio Data System broadcasting station.
Listening to DAB radio (R-N803D) Listening to DAB radio (R-N803D) Selecting a DAB radio station for reception You can select a DAB radio station from the stations stored by the initial scan. Note This unit supports Band III (174 to 240 MHz) only. LINE 1 LINE 2 LINE 3 TUNER NET USB TUNER BAND Before tuning in to DAB stations, an initial scan must be performed. When you select the DAB for the first time, the initial scan is performed automatically.
Listening to DAB radio (R-N803D) Using preset function ■ Recalling a preset station You can register up to 40 DAB radio stations as presets. Once you have registered stations, you can easily tune in to them by recalling the presets. 1 Press TUNER to select “TUNER” as the input source. 2 3 Press BAND to select the DAB band. Note You can register up to 40 favorite radio stations each for DAB and FM bands. TUNER NET Tune into a registered DAB radio station by selecting its preset number.
Listening to DAB radio (R-N803D) Displaying the DAB information This unit can receive various types of DAB information when it is tuned in to a DAB radio station. Checking reception strength of each DAB channel label You can check reception strength of each DAB channel label (0 [none] to 100 [best]).
Playing back music via Bluetooth You can play back music files stored on a Bluetooth device (such as mobile device) on the unit. Please also refer to the owner’s manual of your Bluetooth device. 3 On the Bluetooth device, select the unit (network name) from the available device list. After pairing has been completed and the unit is connected to the Bluetooth device, “Connected” appears on the front display, and Bluetooth indicator will be light up. BLUETOOTH This unit A VOL.
Playing back music via Bluetooth 2 Operate the Bluetooth device to establish a Bluetooth connection. Select the unit’s model name from the Bluetooth device list on your device. When a connection is established, Bluetooth indicator on the front display will be light up. Note If you cannot connect the Bluetooth device, please perform pairing again. 3 Operate the Bluetooth device to play back music. Note You can use the playback keys on the remote control to control playback.
Playing back music stored on media servers (PCs/NAS) You can play back music files stored on your PC or DLNA-compatible NAS on the unit. 3 Click “Turn on media streaming”. 4 Select “Allowed” from the drop-down list next to the unit’s model name. NAS This unit PC Note • To use this function, the unit and your PC/NAS must be connected to the same router (p. 14). You can check whether the network parameters (such as the IP address) are properly assigned to the unit in “Information” (p.
Playing back music stored on media servers (PCs/NAS) Playback of PC music contents Use the following remote control keys to control playback. Follow the procedure below to operate the PC music contents and start playback. Keys Function Cursor keys Select a music file or folder. ENTER Starts playback if pressed while content is selected. Moves down one level if pressed while a folder is selected. RETURN Moves up one level.
Playing back music stored on media servers (PCs/NAS) ■ Automatic playback setting Use this setting to choose whether to automatically play back music from your PC or from the NAS when turning on the unit or when selecting “Server” as the input source. 1 When the input source is “Server”, press OPTION. 2 Use the cursor keys (B / C) to select “Auto Playback” and press ENTER. 3 Use the cursor keys (D / E) to select “On” (enable) or “Off” (disable). 4 To exit from the menu, press OPTION.
Listening to Internet radio Listening to Internet radio Note • To use this function, the unit must be connected to the Internet (p. 14). You can check whether the network parameters (such as the IP address) are properly assigned to the unit in “Information” (p.48) in the “Setup” menu. • You may not be able to receive some Internet radio stations. • This unit uses the airable.Radio service. airable is a service of Tune In GmbH. • This service may be discontinued without notice.
Playing back iPhone/iTunes music via a network (AirPlay) The AirPlay function allows you to play back iPhone/ iTunes music on the unit via network. PC 3 Select a song and start playback. The unit automatically selects “AirPlay” as the input source and starts playback. The playback information is displayed on the front display.
Playing back music stored on a USB storage device Playing back music stored on a USB storage device You can play back music files stored on a USB storage device on the unit. Refer to the instruction manuals for the USB storage device for more information. Note • Do not connect devices other than USB mass storage class devices (such as USB chargers or USB hubs), PCs, card readers, an external HDD, etc. • Some features may not be compatible, depending on the model or manufacturer of the USB storage device.
Playing back music stored on a USB storage device Use the following remote control keys to control playback. Keys Function Cursor keys Select a music file or folder. ENTER Starts playback if pressed while a music file is selected. Moves down one level if pressed while a folder is selected. RETURN Moves up one level. p/ e Playback keys s b/w f/a Pauses/resumes playback. Skips forward/backward. Displays the root directory of the USB device.
Registering the current playback song/station (Preset function) Registering the current playback song/station (Preset function) When you select network sources and USB as the input source, you can register the current playback song or streaming station as a preset up to 40. You can then easily recall any preset song/station by selecting its preset number. The following input sources can be set as presets. Server, Net Radio, USB and streaming services.
ADVANCED OPERATION Optimizing the speaker settings automatically (YPAO) The Yamaha Parametric room Acoustic Optimizer (YPAO) function detects speaker connections, measures the distances from them to your listening position, and then automatically optimizes the speaker settings, such as volume balance and acoustic parameters, to suit your room. 1 Press A (power) on the front panel to turn on this unit. 2 Turn on the subwoofer and set the volume to half.
Optimizing the speaker settings automatically (YPAO) 4 Place the YPAO microphone at your listening position and connect it to the YPAO MIC jack on the front panel. 6 Note To check the measurement result, press the cursor key (E). If “No Warning” appears on the front display, the measurement is properly completed. YPAO( A Place the YPAO microphone at your listening position (same height as your ears). We recommend the use of a tripod as a microphone stand.
Optimizing the speaker settings automatically (YPAO) Error messages If any error message is displayed during the measurement, resolve the problem and perform YPAO again. YPAO E-1 Noisy Error message Cause Remedy The noise is too loud. Keep the room quiet and start the measurement again. E-2 No Signal The YPAO microphone cannot detect test tones. Connect the YPAO microphone to the YPAO MIC jack firmly and start the measurement again.
Optimizing the speaker settings automatically (YPAO) Warning messages If a warning message is displayed after the measurement, you can still save the measurement results. However, we recommend you perform YPAO again in order to use this unit with the optimal speaker settings. YPAO W-1 Out of Phase Warning message Cause Remedy W-1 Out of Phase A speaker cable may be connected with the reverse polarity (+/-). check the cable connections (+/–) of the speakers.
Configuring playback settings for different playback sources (Option menu) You can configure separate playback settings for different playback sources. This menu allows you to easily configure settings during playback. MEMORY Item PRESET Auto Playback Cursor keys B/C/D/E ENTER ENTER HOME RETURN SETUP OPTION 1 MUTE This setting is applied separately to each input source. Setting range -10.0 dB to 0.0 dB to +10.0 dB (0.5 dB increments) A Volume Trim VOL. Default 0.
Configuring various functions (Setup menu) Configuring various functions (Setup menu) You can configure the unit’s various functions. MEMORY Cursor keys B/C/D/E ENTER PRESET ENTER HOME RETURN RETURN SETUP SETUP OPTION VOLUME NOW PLAYING 1 MUTE Press SETUP. SETUP Network 2 Use the cursor keys (B / C) to select a menu item and press ENTER. SETUP Volume VOLUME 3 ADVANCED OPERATION Max Volume Use the cursor keys (D / E) to select a setting and press ENTER. MAX VOL +16.
Configuring various functions (Setup menu) Setup menu items Menu item Function Page Connection Selects the network connection method. 48 Information Displays the network information on the unit. 48 IP Address Configures the network parameters (such as IP address). 49 DMC Control Selects whether to allow a DLNA-compatible Digital Media Controller (DMC) to control playback.
Configuring various functions (Setup menu) ■ IP Address Configures the network parameters (such as IP address). DHCP Select whether to use a DHCP server. Off Does not use a DHCP server. Configure the network parameters manually. For details, see “Manual network settings”. On (Default) Uses a DHCP server to automatically obtain the unit’s network parameters (such as IP address). ■ Standby (Network Standby) Selects whether the unit can be turned on from other network devices (network standby).
Configuring various functions (Setup menu) ■ Update (Network Update) Updates the firmware via the network. Perform Update Starts the process to update the unit’s firmware. For details, see “Updating the unit’s firmware via the network” (p. 54). Version Displays the version of the firmware installed on the unit. ID Displays the system ID number. YPAO Configures the setting related to YPAO. The following settings are available for each speaker system (Speaker A, Speaker B, Speaker A+B).
Configuring various functions (Setup menu) AutoPowerStdby (Auto Power Standby) Enables/disables the auto-standby function. If you do not operate the unit for the specified time, the unit will automatically go into standby mode. Off Does not set the unit to standby mode automatically. On Sets the unit to standby mode automatically. While NET, BLUETOOTH or USB is selected as the input source, the unit will switch to standby mode if the selected source is not played back for 20 minutes.
Configuring the system settings (ADVANCED SETUP menu) Configure the system settings of the unit using the front panel controls. RETURN A (power) VERSION••xx.xx PURE DIRECT DIMMER DISPLAY MODE MEMORY CLEAR BAND PRESET TUNING VOLUME INPUT BASS BALANCE TREBLE LOUDNESS SELECT PUSH - ENTER FLAT PHONES SPEAKERS A B Checking the firmware version (VERSION) Check the version of firmware currently installed on the unit.
Configuring the system settings (ADVANCED SETUP menu) Setting tuner frequency step (TU) Updating the firmware (UPDATE) UPDATE•NETWORK TU••••FM50/AM9 Settings FM100/AM10, FM50/AM9 (Default) New firmware that provides additional features or product improvements will be released as needed. If the unit is connected to the Internet, you can download the firmware via the network. For details, refer to the information supplied with updates.
Updating the unit’s firmware via the network New firmware that provides additional features or product improvements will be released as needed. If the unit is connected to the Internet, you can download the firmware via the network and update it. Notice • Do not operate the unit or disconnect the power cable or network cable during firmware update. Firmware update takes about 5 minutes or more (depending on your Internet connection speed).
ADDITIONAL INFORMATION Troubleshooting Refer to the chart below if this unit does not function properly. If the problem you are experiencing is not listed below or if the instructions below do not help, set this unit to standby mode, disconnect the power cable, and contact the nearest authorized Yamaha dealer or service center. ■ General See page Possible cause Remedy The protection circuitry has been activated three times consecutively.
Troubleshooting Problem Possible cause Remedy See page Set the speaker impedance to match your speakers. 52 Check that the speaker wires are not touching each other and then turn the power of this unit back on. 11 This unit has become too hot. Make sure the openings on the top panel are not blocked. — The auto power standby function has turned this unit off. Change the auto power standby (“AutoPowerStdby” in the “Setup” menu) to turn off. 51 Incorrect cable connections.
Troubleshooting ■ FM reception Problem The FM radio reception strength is poor, and noise can be heard. The radio station cannot be automatically selected. Possible cause Remedy See page The unit is receiving radio interference, such as multipath reflections. Change the antenna height, direction, or place of installation. ― The unit is receiving in a region located far away from the radio station. Press MODE on the front panel to select “MONO” (monaural mode).
Troubleshooting Problem Possible cause The DAB radio reception strength is poor, and noise (such as hiss, crackle and jitter) can be heard. The DAB radio signal is weak. The DAB information cannot be displayed or is inaccurate. The DAB station may be temporarily out of service, or the DAB station information is not provided by the DAB broadcaster. Remedy See page Change the antenna height, direction, or place of installation. 13 Contact the DAB broadcaster.
Troubleshooting ■ USB/network Remedy See page The USB storage device is not connected to the USB jack securely. Turn off the unit, reconnect your USB device, and turn the unit on again. 39 The file system of the USB storage device is not FAT16 or FAT32. Use a USB storage device with FAT16 or FAT32 format. 62 Folders and files in the USB device cannot be viewed. The data in the USB storage device is protected by the encryption. Use a USB storage device without an encryption function.
Troubleshooting Problem Possible cause Remedy See page The network separator function on the wireless LAN router (access point) may be preventing this unit from being accessed. When connecting to this unit with an iPhone, use an SSID on which this unit can be accessed (try connecting via the primary SSID). ― This unit cannot be detected when using AirPlay on an iPhone. A wireless LAN router (access point) that supports multiple SSIDs is used.
Error indications on the front display Error indications on the front display Message Possible cause Remedy Access denied Access to the PC is denied. Configure the sharing settings and select the unit as a device to which music contents are shared (p. 34). Access error The unit cannot access the USB device. Turn off the unit and reconnect your USB device. If the problem persists, try another USB device. The unit cannot access the iPod. Turn off the iPod and turn it on again.
Supported devices and file formats Supported devices ■ Bluetooth device • This unit supports Bluetooth devices that support A2DP audio profile and AVRCP control profile. • Bluetooth device may not be detected by the unit or some feature may not be compatible, depending on the model. ■ USB storage device • This unit supports USB mass storage class devices (e.g., flash memories or portable audio players) using FAT16 or FAT32 format. • USB storage devices with encryption cannot be used.
Trademarks Trademarks DLNA™ and DLNA CERTIFIED™ are trademarks or registered trademarks of Digital Living Network Alliance. All rights reserved. Unauthorized use is strictly prohibited. Windows™ Windows is a registered trademark of Microsoft Corporation in the United States and other countries. Internet Explorer, Windows Media Audio and Windows Media Player are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
Specifications Network • • • • • • • Input jack: NETWORK x 1 (100Base-TX/10Base-T) PC client function Compatible with DLNA ver. 1.5 AirPlay supported Internet radio Streaming service Wi-Fi function Capable of direct connection with mobile device Available security method ....................................... WEP, WPA2-PSK(AES), Mixed Mode Radio frequency band ....................................................... 2.4 GHz Radio frequency (operational frequency) ...........................................
Specifications • Standby power consumption (reference data) ......................... 0.1 W • Network Standby on Wired .................................................................................... 1.7 W Wireless (Wi-Fi/Wireless Direct/Bluetooth)......................... 1.8 W • Maximum power consumption (1 kHz, 8Ω, 10% THD) [Asia and General models] .................................................. 450 W • Dimensions (W H D) ................................
Index A AC IN jack....................................................................... 7 ADVANCED SETUP menu.......................................... 52 AirPlay........................................................................... 38 AM antenna ................................................................... 13 AM radio ....................................................................... 25 ANTENNA terminals...................................................... 7 Auto Playback, option menu ..
Index PHONES jack ................................................................. 5 PHONES, front display message .................................. 44 PHONO jacks ................................................................. 7 Playback keys ................................................................. 9 Playback, Bluetooth device contents ............................ 32 Playing back, PCs/NAS content ................................... 34 Playing back, USB content ................................
Information for users on collection and disposal of old equipment and used batteries: These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste. For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable collection points, in accordance with your national legislation.
EN English CS Czech SIMPLIFIED EU DECLARATION OF CONFORMITY Hereby, Yamaha Music Europe GmbH declares that the radio equipment type [R-N803D] is in compliance with Directive 2014/ 53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://europe.yamaha.com/en/support/compliance/doc.html ZJEDNODUŠENÉ EU PROHLÁŠENÍ O SHODĚ Tímto Yamaha Music Europe GmbH prohlašuje, že typ rádiového zařízení [R-N803D] je v souladu se směrnicí 2014/53/EU.
PL Polish UPROSZCZONA DEKLARACJA ZGODNOŚCI UE Yamaha Music Europe GmbH niniejszym oświadcza, że typ urządzenia radiowego [R-N803D] jest zgodny z dyrektywą 2014/ 53/UE. Pełny tekst deklaracji zgodności UE jest dostępny pod następującym adresem internetowym: https://europe.yamaha.com/en/support/compliance/doc.
Yamaha Global Site https://www.yamaha.com/ Yamaha Downloads http://download.yamaha.
