User Manual
Table Of Contents
- English
- Français
- PRÉCAUTIONS D’USAGE
- TABLE DES MATIÈRES
- FONCTIONS UTILES
- ACCESSOIRES FOURNIS
- COMMANDES ET FONCTIONS
- RACCORDEMENTS
- LECTURE
- ÉCOUTER VOTRE MUSIQUE À PARTIR DE VOTRE PÉRIPHÉRIQUE Bluetooth®
- SYNTONISATION FM/AM (R-S202)
- SYNTONISATION FM (R-S202D)
- ÉCOUTER LA RADIO DAB (R-S202D)
- PARAMÉTRAGE DU MENU OPTION POUR CHAQUE SOURCE D’ENTRÉE
- GUIDE DE DÉPANNAGE
- CARACTÉRISTIQUES TECHNIQUES
- Español
- PRECAUCIONES
- ÍNDICE
- CARACTERÍSTICAS DE UTILIDAD
- ACCESORIOS SUMINISTRADOS
- CONTROLES Y FUNCIONES
- CONEXIONES
- REPRODUCCIÓN
- ESCUCHAR MÚSICA DESDE SU DISPOSITIVO Bluetooth®
- SINTONIZACIÓN DE FM/AM (R-S202)
- SINTONIZACIÓN DE FM (R-S202D)
- ESCUCHAR RADIO DAB (R-S202D)
- AJUSTE DEL MENÚ OPTION PARA CADA FUENTE DE ENTRADA
- SOLUCIÓN DE PROBLEMAS
- ESPECIFICACIONES
10 En
CONNECTIONS
■ OUT jacks
• The OUT jacks output audio signals of the currently
selected input (except when LINE 3 is selected).
• Volume level, tone control and balance settings do not
affect the OUT jacks.
■ Connecting speaker cables
When inserting speaker cables into the speaker terminals, insert
only the bare speaker wire. If insulated cable is inserted, the
connection may be poor and sound may not be heard.
Connect the speakers with an impedance as shown below.
If you connect speakers with an excessively low
impedance, this unit may overheat.
■ Bi-wire connection
Bi-wire connection separates the woofer from the
combined midrange and tweeter section.
A bi-wire compatible speaker has four binding post
terminals. These two sets of terminals allow the speaker to
be split into two independent sections. With these
connections, the mid and high frequency drivers are
connected to one set of terminals and the low frequency
driver to another set of terminals.
Connect the other speaker to the other set of terminals in
the same way.
When making bi-wire connections, remove the shorting bridges
or cables on the speaker.
y
To use the bi-wire connections, press SPEAKERS A and
SPEAKERS B so that both SP A and B light up on the front panel
display.
Note
CAUTION
Speaker connection Speaker impedance
SPEAKERS A or
SPEAKERS B
8 Ω or higher
SPEAKERS A and
SPEAKERS B
16 Ω or higher
(except for North
America model)
Bi-wiring
8 Ω or higher
Remove approximately
10 mm (3/8 in) of
insulation from the end of
each speaker cable.
Note
Rear panel
Speaker
SLEEP
LINE 1
CD TUNER
TUNING
PRESET
TREBLE
SPEAKERS
R
BASS
BALANCE
MEMORY
INFO
BAND
LINE 2 LINE 3
B
A
B
A
SPEAKERS A/B