Owner’s Manual EN
SPECIAL MESSAGE SECTION This product utilizes batteries or an external power supply (adapter). DO NOT connect this product to any power supply or adapter other than one described in the manual, on the name plate, or specifically recommended by Yamaha. This product may also use “household” type batteries. Some of these may be rechargeable. Make sure that the battery being charged is a rechargeable type and that the charger is intended for the battery being charged.
FCC INFORMATION (U.S.A.) 1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. 2. IMPORTANT: When connecting this product to accessories and/ or another product use only high quality shielded cables. Cable/s supplied with this product MUST be used. Follow all installation instructions.
PRECAUTIONS PLEASE READ CAREFULLY BEFORE PROCEEDING * Please keep this manual in a safe place for future reference. WARNING Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the following: Power supply/AC power adaptor Water warning • Only use the voltage specified as correct for the instrument.
Connections • Before connecting the instrument to other electronic components, turn off the power for all components. Before turning the power on or off for all components, set all volume levels to minimum. Also, be sure to set the volumes of all components at their minimum levels and gradually raise the volume controls while playing the instrument to set the desired listening level. Maintenance • When cleaning the instrument, use a soft, dry cloth.
This product incorporates and bundles computer programs and contents in which Yamaha owns copyrights or with respect to which it has license to use others’ copyrights. Such copyrighted materials include, without limitation, all computer software, style files, MIDI files, WAVE data, musical scores and sound recordings. Any unauthorized use of such programs and contents outside of personal use is not permitted under relevant laws. Any violation of copyright has legal consequences.
Congratulations and thank you for purchasing the Yamaha PSR-S500 PortaTone! Please read this owner’s manual carefully before using the instrument in order to take full advantage of its various features. Make sure to keep this manual in a safe and handy place even after you finish reading, and refer to it often when you need to better understand an operation or function. Accessories The instrument package includes the following items. Please check that you have them all.
Special Features of the PSR-S500 ■ Play a Variety of Instrument Voices Page 17 The instrument voice that sounds when you play the keyboard can be changed to violin, flute, harp, or any of an extensive range of voices. You can change the mood of a song written for piano, for example, by using violin to play it instead. Experience a whole new world of musical variety.
Contents Logos........................................................................................ 6 Accessories .............................................................................. 7 Special Features of the PSR-S500 .......................................... 8 Setting Up 10 Power Requirements .............................................................. 10 Connecting Headphones (PHONES/OUTPUT Jack) ............. 10 Connecting a Footswitch (SUSTAIN Jack).............................
Setting Up Be sure to do the following operations BEFORE turning on the power. Power Requirements Make all necessary connections below BEFORE turning the power on. Connecting Headphones (PHONES/OUTPUT Jack) Make sure that the [STANDBY/ON] switch of the instrument is set to STANDBY. • Use ONLY a Yamaha PA-300 or PA-301 AC Power Adaptor (or other adaptor specifically recommended by Yamaha) to power your instrument from the AC mains.
Setting Up Connecting to a Computer (USB Terminal) Turning the Power On Turn down the volume by turning the [MASTER VOLUME] control to the left and press the [STANDBY/ON] switch to turn on the power. Press the [STANDBY/ON] switch again to turn the power OFF. Connect the instrument’s USB terminal to the USB terminal of a computer, and you can transfer performance data and song files between the two (page 85).
Setting Up Changing the Display language Adjusting the LCD CONTRAST control This instrument allows you to select English or Japanese as the display language. The default display language is English, but if you switch to Japanese the lyrics, file names and some messages will be displayed in Japanese where appropriate. Adjust the LCD CONTRAST control on the rear panel of the instrument for optimum display legibility. Press the [FUNCTION] button.
Setting Up ● Music Rest Insert the music rest into the slots as shown.
Panel Controls and Terminals e r t o y q !0 !2 u w i !3 !4 !1 !5 @9 Front Panel q [STANDBY/ON] switch .................... page 16 w [MASTER VOLUME] control.... pages 16, 40 e [DEMO] button ................................. page 16 r [SONG MODE] button ..................... page 27 t SONG [PRESET], [USER], [USB] buttons ..................................................... page 27 [SCORE] button ............................ page 30 [LYRICS] button ............................
Panel Controls and Terminals !7 @2 @3 !8 @0 !9 @6 @4 @5 @7 @8 @1 !6 Rear Panel #0 #1 #2 #3 #4 Rear Panel !9 Dial.................................................... page 41 #0 SUSTAIN jack................................... page 10 @0 [+/YES] and [-/NO] buttons ............. page 41 #1 USB TO HOST and TO DEVICE terminals .......................................... page 80 r f @1 CATEGORY [ ] and [ ] buttons ... page 41 @2 [FUNCTION] button .........................
e d ck Gui ui Q Playing Songs Quick Guide This instrument include a Demonstration Song. Let’s start by playing the Demonstration Song. 1 Press the [STANDBY/ON] button until it locks in the ON position. The Main display appears in the LCD. VOICE name STYLE name SONG name Music Database name 2 Press the [DEMO] button to start the Demo. 3 >/■] button to stop Demo. Press the [> 16 The Demo display appears in the LCD.
e d ck Gui ui Q Try playing a variety of Instrument Voices In addition to piano, organ, and other “standard” keyboard instruments, this instrument has a large range of realistic Voices—including guitar, bass, strings, sax, trumpet, drums and percussion, sound effects, and a wide variety of other musical sounds. Select and Play a Voice In this operation, you’ll select a Main Voice and play it on the keyboard. 1 Select and press the desired Voice category button in the Voice section.
Try playing a variety of Instrument Voices Playing Two Voices Simultaneously—DUAL This lets you select a second Voice which you can play in addition to the Main Voice. The second Voice is known as the “Dual” Voice. Two Voices will sound at the same time. 1 Press the [DUAL] button. The [DUAL] button turns the Dual Voice on or off. When Dual Voice is turned on, the [DUAL] button is lit. The currently selected Dual Voice will sound in addition to the Main Voice when you play the keyboard.
Try playing a variety of Instrument Voices 4 Select the Voice you want to play. 5 Play the keyboard. Look at the highlighted Voice name and rotate the dial. The available Voices will be selected and displayed in sequence. The Voice selected here becomes the Dual Voice. For this example, select the “003 Marimba” Voice. Try selecting and playing a range of Dual Voices. Press the [EXIT] button to return to the MAIN display.
Try playing a variety of Instrument Voices 2 Press and hold the [LEFT] button for longer than a second. The LEFT Voice selection display will appear. The currently selected category name, Voice number and name will be highlighted. Left Voice selection display The currently selected category The currently selected Left Voice Hold for longer than a second 3 Select and press the desired Voice category button in the VOICE section. For this example, select the “GUITAR” category.
Try playing a variety of Instrument Voices Playing Drum Kits Drum Kits are collections of drum and percussion instruments. When you select a violin or other normal instrument—as a Main Voice, for example—all keys produce the sound of the same violin, only at different pitches. If you select a Drum Kit as the Main Voice, however, each key produces the sound of a different drum or percussion instrument. 1 Press the [PERC./DRUM KIT] button.
e d ck Gui ui Q Playing Styles This instrument includes an auto-accompaniment feature that plays appropriate “Styles” (rhythm + bass + chord accompaniment) when you play left-hand chords. You can select from 150 different Styles covering a range of musical genres and time signatures (see page 107 for a complete list of the available Styles). Here’s how you can use the auto-accompaniment feature. Select a Styles Rhythm Most Styles include a rhythm part.
Playing Styles Playing Along with a Style You learned how to select a Style rhythm on the preceding page. Here we’ll see how to add bass and chord accompaniment to the basic rhythm to produce a full, rich accompaniment that you can play along with. 1 Select and press the desired Style category button in the Style section. Press the [EXIT] button to return to the Main display. 2 Turn automatic accompaniment on. Press the [ACMP] button.
Playing Styles 4 Play a left-hand chord to start the Style. You can still “play” chords even if you don’t actually know any chords. This instrument will recognize even a single note as a chord. Try playing from one to three notes at the same time to the left of the split point. The chord will change according to the left-hand notes you play. Split point 5 Play a variety of left-hand chords while playing a melody with your right hand.
Playing Styles Playing Auto-accompaniment Chords There are two ways of playing auto-accompaniment chords: ● Easy Chords ● Standard Chords The instrument will automatically recognize the different chord types. The keyboard to the left of the split point (default: 54/F#2) becomes the “accompaniment range.” Play the accompaniment chords in this area of the keyboard.
e d ck Gui ui Q Playing with the Music Database You want to play music in your favorite Style, but you’re not sure how to select the best Voice and Style for the type of music you want to play, simply select the appropriate Style from the Music Database. The panel settings will automatically be adjusted for the ideal combination of sounds and Style! 1 Press the [MDB] button. 2 Select the desired Music Database which matches the music style or type you want to play.
e d ck Gui ui Q Using Songs With this instrument the term “Song” refers the data that makes up a piece of music. In this section we’ll learn how to select and play Songs. Song (Score) Listen (Lyrics) See Record Selecting and Listening to a Song 1 Select and press one of the Song category buttons, which corresponds to the type of Song you want to listen to. [PRESET] : Five preset Songs are available here. [USER] : This contains your recorded Songs and Songs loaded from computer.
Using Songs PRESET 3 Built-in Songs 1 Annie Laurie (Traditional) 2 Oh, Susanna (Sunny Skylar, S. Foster) 3 Little Brown Jug (Traditional) 4 Waltz Op.18 (F. Chopin) 5 Piano Concerto No.21 2nd Mov. (W.A. Mozart) USER User Songs (Songs you record yourself) or Songs transferred from a computer (pages 85–87) USB Songs in a USB flash memory connected to the instrument (page 74) Listen to the Song. Press the [>/■] button to begin playback of the selected Song.
Using Songs Types of Songs The following four types of Songs can be used by this instrument. ● ● ● ● Preset Songs (the five Songs built into the instrument)............... Preset Song numbers 001–005. User Songs (recordings of your own performances) ................... USER Song numbers 001–005. Loaded Songs (Song data loaded from computer) ...................... USER Song numbers 006– USB Songs (Song data in the USB flash memory) ...................... Song numbers 001–.
Using Songs Displaying the Song Score This instrument is capable of display the scores (notation) of Songs. Scores are displayed for the preset Songs. Scores can also be displayed for Songs loaded from computer as well as Songs played back from USB flash memory. Although User Songs you record yourself cannot display a score as is, they can be converted to SMF (Standard MIDI File) format and stored to USB flash memory, from where they can be played with score display.
Using Songs Displaying the Lyrics If a Song contains lyric data, the lyrics can be made to appear on the display. No lyrics will be displayed for a Song that contains no lyric data, even if the [LYRICS] button is pressed. 1 Select a Song. 2 Press the [LYRICS] button. Follow steps 1 and 2 of the procedure described on page 27. Try to select the Preset SONG 001–002. NOTE The title, lyricist, and composer of the Song will appear on the display.
e d ck Gui ui Q Recording Your Own Performance You can record up to five of your own performances and save them as user Songs 001 through 005. These Songs can be played in the same manner as the preset Songs. Once your performances have been saved as user Songs, they can be converted to SMF (Standard MID File) format files and saved to USB flash memory (page 77) and used with the score display function.
Recording Your Own Performance Chord parts Melody or other parts Specify track(s) and record Track 1 Track 2 Track 3 Main Voice part Dual Voice part Left Voice part Track 4 Track 5 Track 6 Track 7 Track 8 Other parts Track ACMP Style Example: Part settings in Multi Recording Quick Recording Procedure You can easily start recording your performance by simply pressing the [REC] button. In this case, the track number and part number of tracks are set automatically.
Recording Your Own Performance 2 Recording will start when you play the keyboard. Current measure number Start recording 3 >/■] or [REC] button. Stop recording by pressing the [> Track numbers containing recorded data are indicated with framed rectangles. or 4 >/■] button to play back the recording. Press the [> Multi-track Recording Procedure You can set the recorded user Song number and the parts for tracks individually.
Recording Your Own Performance 2 Select the recording part for each track (Part Assign). ◆ Selecting the part for the Melody track (tracks 1–8) While holding down the [REC] button, press one of the track buttons [1]–[8] until the desired part is shown at the track button. Each time you press the button, the part is changed in order (such as MAIN, DUAL, LEFT) in the Main display.
Recording Your Own Performance 3 Recording will start when you play the keyboard. You can also start recording by pressing the [ >/■] button. Press the [EXIT] button, and the measure number is shown in the Main display. When recording is started, the display automatically returns to the Main display. Current measure number NOTE • When Song memory is full, a corresponding message is shown in the display and recording will be stopped.
Recording Your Own Performance ● Not recorded data The following data is recorded before the beginning of the Song. Even if you change the data while recording is in progress, the data is not recorded. Reverb type, Chorus type, DSP type, DSP send level, Dry level, Style number, Style volume, Time signature Song Clear—Deleting User Songs This function clears an entire user Song (all tracks). 1 2 3 NOTE From the MAIN display, select the user Song (001 to 005) you want to clear.
Recording Your Own Performance Track Clear—Deleting a Specified Track From a User Song This function lets you delete a specified track from a User Song. 1 2 From the MAIN display select the User Song (001 to 005) you want to clear. Press the [REGIST/TRACK] button a number of times until the item you want to clear appears. The item changes in order from “REGIST.” to “TR 1–8” to “ACMP. TR”. Select the desired track: “TR 1–8” or “ACMP. TR”.
Backup and Initialization Backup The following data items are automatically saved as backup data in the internal memory even if you turn the power off. To recall the default settings and data, use the Initialization operation.
Basic Operation and Displays Basic Operation Overall PSR-S500 control is based on the following simple operations. 1 Use the category buttons to select a CATEGORY. 2 Use the dial to select an item or value. 3 Starting/stopping a Song or Style. 1 Song category 1 Style category ● Volume Adjustment Adjusts the volume of the sound heard via the instrument’s speakers or a pair of headphones plugged into the PHONES jack. Rotate counterclockwise to lower the volume.
Basic Operation and Displays r f ● Category buttons [ ], [ ] You can change the category after you’ve selected a Song, Style or Voice category. Pressing these buttons allow you to step in sequence through the categories. Example: Voice selection display Previous category Next category 2 Use the dial to select an item or value. When you select the category such as Song, Style or Voice, the selected category name and item is shown on the display.
Basic Operation and Displays The Displays ● Display names The display provides important, easy-to-understand indications for performing all operations. The name of the current display appears at the top of the display. You can see the “MAIN” indication at the top on the display. ● MAIN Display Title Call up the Main display Most basic operations are carried out from the instrument’s MAIN display.
Basic Operation and Displays MAIN Display Items The MAIN display shows all of the current basic settings: Song, Style, Voice. It also includes a range of indicators that show the on/off status of a range of functions. Transpose (page 53) Measure number (page 36) OCTAVE (page 54) REGISTRATION memory / Song track indication Shows currently selected item: REGIST., TR 1–8, TR 9–16 or ACMP (page 66) Tempo (page 49, 51) A-B Repeat Appears when the Repeat function is on for Song playback.
Reference e erenc ef R Playing with the Effects Adding Harmony This feature adds Harmony, Tremolo or Echo effects to the Main Voice. 1 Press the [HARMONY] button to turn the Harmony function on. The [HARMONY] button lights indicating that Harmony is on. To turn Harmony off, press the [HARMONY] button again. 3 Use the dial to select a Harmony type. Refer to the Effect Type List on page 110 for information about the available Harmony types. Try playing the keyboard with the Harmony function.
Playing with the Effects Changing the Reverb Type Reverb enhances the sound of the Voices with the rich ambience of a concert hall. When you select a Style or Song the optimum reverb type for the Voice used is automatically selected. If you want to select a different reverb type, use the operation described below. 1 Press the [FUNCTION] button to call up the FUNCTION display. 2 Press the CATEGORY [ 3 Use the dial to select a Reverb Type.
Playing with the Effects Changing the Chorus Type The Chorus effect creates a thick sound that is similar to many of the same Voices being played in unison. When you select a Style or Song the optimum chorus type for the Voice used is automatically selected. If you want to select a different Chorus Type, use the procedure described below. 1 Press the [FUNCTION] button to call up the FUNCTION display. 2 Press the CATEGORY [ 3 Use the dial to select a Chorus Type.
Playing with the Effects Panel Sustain This function adds sustain to the keyboard Voices. Use it when you want to add sustain to the Voices at all times, regardless of footswitch operation. The sustain function does not affect the Left Voice. Press the [SUSTAIN] button to turn the sustain function on. The [SUSTAIN] button lights indicating that Sustain is on. NOTE • For certain Voices, the sustain effect may not be obvious or audible, even when the panel sustain function is turned on.
Playing with the Effects Pitch Bend The pitch bend wheel can be used to add smooth pitch variations to notes you play on the keyboard. Roll the wheel upward to raise the pitch, or downward to lower the pitch. If you use this feature with a Voice such as the “042 Overdriven” guitar Voice (page 17), you can produce remarkably realistic string-bending effects. You can change the amount of pitch bend produced by the wheel, as described on page 71.
e erenc ef R Using Various Functions Playing with the metronome This instrument includes a metronome with adjustable tempo and time signature. Play and set the tempo that is most comfortable for you. ■Turn the metronome on● ● ● ● ● ● ● ● Press the [METRONOME] button to start the metronome. To stop the metronome, press the [METRONOME] button again.
Using Various Functions ■Changing the Time Signature ● ● ● In this example we’ll set up a 3/8 time signature. 1 Press and hold the [METRONOME] button for longer than a second. The currently selected time signature is displayed. 4 Use the dial to select a beat length. Select the required length for each beat: 2, 4, 8, or 16 (half note, quarter note, eighth note, or 16th note). For this example, select 8. The time signature should now be set to 3/8.
Using Various Functions Using Tap Start You can also set the tempo by simply tapping the [TAP TEMPO] button at the required tempo—four times for time signatures in 4, and three times for time signatures in 3. You can change the tempo during Song or Style playback by pressing the button just twice. Touch Response Keyboard Touch Response can be turned on by pressing the [TOUCH] button. When Touch Response is on you can control the volume of notes according to how hard you play the keys.
Using Various Functions EQ settings Five pre-programmed EQ settings are available. Settings 1 and 2 are best for listening via the instrument’s built-in speakers, setting 3 is for headphones, and settings 4 and 5 are ideal for listening via external speakers or when connecting to an external mixer. 1 Press the [FUNCTION] button. The currently selected function will appear in the display. 2 Press the CATEGORY [ r f ] and [ ] buttons as many times as necessary to call up Master EQ Type.
Using Various Functions Pitch Controls 1 Press one of the TRANSPOSE [+]/[-] buttons. The value is shown in the display, indicating the amount of transposition over or below the normal value. ◆ Small Pitch Changes (Tuning) The overall tuning of the instrument can be shifted up or down by a maximum of 1 semitone in approximately 0.2-Hz steps. The default setting is 440 Hz. 1 Press the [FUNCTION] button. 2 Press the CATEGORY [ f ] and [ ] buttons as many times as necessary to call up Tuning.
Using Various Functions Changing the pitch of the instrument in octaves You can change the playing pitch of the Main and Dual Voices in octave intervals. 1 Press the UPPER OCTAVE [+] button to raise the pitch by one octave. The newly changed value is shown in the LCD. Press the [EXIT] button to return to the Main display. ● In the case of UPPER OCTAVE +1 2 Press the UPPER OCTAVE [-] button to lower the pitch by one octave. The newly changed value—now one octave lower—is shown in the LCD.
e erenc ef R Style (Auto Accompaniment) Functions Basic operation of the Style (Auto Accompaniment) feature is described on page 22 of the Quick Guide. Included here is information on how you can play the Styles in various ways, how to adjust the Style volume, how you can play chords using the Styles, and more. Pattern Variation (sections) The instrument features a wide variety of Style “sections” that allow you to vary the arrangement of the accompaniment to match the Song you are playing.
Style (Auto Accompaniment) Functions 1 Select the desired Style. (See page 22.) 2 Press the [ACMP] button to turn Auto 5 Press one of the MAIN VARIATION [A]– [D] buttons. The selected Main Variation button flashes. Accompaniment on. The [ACMP] button lights when ACMP is turned on. 3 Press the [AUTO FILL IN] button to turn the Auto Fill In function on. The initial default setting for Auto Fill In is “on.” 4 Press the [SYNC START] button to turn Synchro Start on.
Style (Auto Accompaniment) Functions 8 Press one of the MAIN VARIATION [A]– [D] buttons. ● Synchro Stop When this function is selected, the accompaniment Style will only play while you are playing chords in the accompaniment range of the keyboard. Style playback will stop when you release the keys. To turn the function on, press the [SYNC STOP] button. When the fill-in is finished, it leads smoothly into the selected Main section A–D. 9 Press one of the ENDING/rit. [I]–[III] buttons.
Style (Auto Accompaniment) Functions One Touch Setting Sometimes selecting the ideal Voice to play with a Song or Style can be confusing. The One Touch Setting feature automatically selects four ideally matched Voices for the Style you’ve selected. 1 Select the desired Style. (See page 22.) 2 Press one of the ONE TOUCH SETTING [1]–[4] buttons. 3 Play the chord in the accompaniment range and start the Style. Try selecting other ONE TOUCH SETTING [1]–[4] buttons and listen to the results.
Style (Auto Accompaniment) Functions Setting the Split Point The initial default Split Point is key number 54 (the F#2 key), but you can change it to another key using the procedure described below. 1 Press the [FUNCTION] button. 3 Use the dial to set the Split Point to any key from 000 (C-2) through 127 (G8). Split Point (54: F#2) Left Voice Main Voice NOTE • Changing the Split Point here also changes the Auto Accompaniment Split Point.
Style (Auto Accompaniment) Functions Playing a Style with Chords but without Rhythm (Stop Accompaniment) When Auto Accompaniment is on (ACMP button lights) and Synchro Start is off, you can play chords in the left-hand accompaniment range of the keyboard while the Style is stopped and still hear the accompaniment chords. This is called “Stop Accompaniment,” and any of the chord fingerings recognized by the instrument can be used (page 25).
Style (Auto Accompaniment) Functions Chord Basics Two or more notes played together constitute a “chord”. The most basic chord type is the “triad” consisting of three notes: the root, third, and fifth degrees of the corresponding scale. A C major triad, for example, is made up of the notes C (the root), E (the third note of the C major scale), and G (the fifth note of the C major scale).
Style (Auto Accompaniment) Functions ■Recognized Standard Chords ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● All chords in the chart are “C-root” chords.
Style (Auto Accompaniment) Functions User Style This instrument features 11 internal Style categories, but it also allows you to import additional Styles (only those with an “.sty” extension) that you’ve downloaded from the Internet or gotten from other sources, and load them into a User Style and use them in the same way as the internal Styles. For details on loading a Style file, see “Loading User Files and Style Files ” on page 78.
e erenc ef R Song Settings Song Volumes 1 Press the [FUNCTION] button. 2 Use the CATEGORY [ r f ] and [ ] buttons as many times as necessary to call up Song Volume. Song Volume Can be set between 000 and 127 3 Use the dial to set the Song volume between 000 and 127. NOTE • Song volume can be adjusted while a Song is selected. Changing the Tempo When playing the Song you can change the tempo as required. Press the TEMPO [+]/[-] buttons.
Song Settings A-B Repeat You can specify a section of a Song—“A” is the start point and “B” is the end point—for repeat playback. The A-B Repeat function is also very convenient for practicing when used along with the score display features of the instrument (page 30). A 1 Play the Song (page 27) and press the [A B] button at the beginning of the section you want to repeat (the “A” point). B 3 The specified A-B section of the Song will now play repeatedly.
Song Settings Muting Independent Song Parts Each “track” of a Song plays a different part of the Song—melody, percussion, accompaniment, etc. You can mute individual tracks and play the muted part on the keyboard yourself, or simply mute tracks other than the ones you want to listen to. Use the [REGIST/TRACK] button to select the TR 1–8, TR 9–16 or ACMP.TR and use the REGISTRATION MEMORY [1]–[8] buttons to mute or un-mute the corresponding tracks ([1]–[8], [9]–[16] or ACMP).
e erenc ef R Memorize Your Favorite Panel Settings This instrument has a Registration Memory feature that lets you save your favorite settings for easy recall whenever they’re needed. Up to 64 complete setups can be saved (8 banks of 8 setups each). Up to 64 presets (eight banks of eight each) can be memorized.
Memorize Your Favorite Panel Settings Recalling a Registration Memory Make sure that “REGIST” appears in the display (press the [REGIST/TRACK] button until it is shown). 1 Press the REGIST BANK [+]/[-] button to select the desired bank. You can also use the dial to select the bank number.
Memorize Your Favorite Panel Settings Registration Clear—Deleting a Specified Registration Memory Keep in mind that groups of data cannot be deleted or cleared from the instrument at a single time. 1 Press the [REGIST/TRACK] button a number of times until the “REGIST.” item appears. The item changes in order from “REGIST.” to “TR 1–8” to “ACMP.TR”. This step is not necessary if the instrument is in the Style mode.
e erenc ef R The Functions The “Functions” provide a wide range of both detailed and overall instrument parameters, such as adjusting the tuning, setting the split point, and editing the voices and effects. Selecting and Setting Functions There are 49 function parameters in all. 1 Find the function you want to set in the list that begins on page 71. 2 Press the [FUNCTION] button. 3 Select a function.
The Functions ■ Function Setting List Group VOLUME OVERALL MAIN VOICE Function Item Style Volume Song Volume Tuning Display Indication Range/Settings Style Volume 000–127 Song Volume 000–127 Tuning 415.3–466.
The Functions Group EFFECT HARMONY Function Item Reverb Type Display Indication Range/Settings Reverb Type 01–26 Chorus Type Chorus Type 1–31 DSP Type DSP Type 001–179 Master EQ Type Master EQ Type Harmony Type Harmony Type 1 (Speaker 1), 2 (Speaker 2), 3 (Headphones), 4 (Line Out 1), 5 (Line Out 2) 01–26 Harmony Volume PC1/PC2/OFF Determines the Harmony type. (See the list on page 110) Determines the volume of the Harmony effect.
e erenc ef R Using USB Flash Memory USB flash memory is a memory medium used for storing data. When a USB flash memory device is inserted in this instrument’s USB TO DEVICE terminal, user songs created on the instrument and the registered settings can be saved to or loaded from the device. USB flash memory can also be used to transfer song data downloaded from the Internet to the instrument. Furthermore, user songs saved to USB flash memory in MIDI file format can also be used with these features.
Using USB Flash Memory Using USB Flash Memory 1 Connect a USB flash memory to the USB TO DEVICE terminal, being careful to insert it in the proper direction. (Do not try to force an improper connection.) 2 Check that the “CONNECT” message is shown in the MAIN display. CONNECT You can go to the FILE CONTROL display from which you can access USB flash memory operations by pressing the [MENU] button from this display. (Do not press this button now, but only when instructed to in the sections below.
Using USB Flash Memory Formatting USB Flash Memory A new USB flash memory device must be formatted before it can be used by this instrument. CAUTION • If you format a USB flash memory that already contains data, all of the data will be erased. Be careful not to erase important data when using the format function. 1 After connecting the USB flash memory to be formatted to the instrument’s USB TO DEVICE terminal, check that the “CONNECT” message is shown in the MAIN display.
Using USB Flash Memory Saving Data Three types of data are saved to one “User File” by this operation: user song, style file, and registration memory data. When you save a “User File” the style file and registration memory are also saved automatically. 1 Make sure that a appropriately format- ted USB flash memory device has been properly connected to the instrument’s USB TO DEVICE terminal, and that a “CONNECT” message is shown in the MAIN display.
Using USB Flash Memory Convert a User Song to SMF Format and Save This operation converts a user song (song numbers 001–005) to SMF Format 0 and saves the file to USB flash memory. ● What is SMF (Standard MIDI File)? ● To Overwrite an Existing File The SMF (Standard MIDI File) format is one of the most common and widely compatible sequence formats used for storing sequence data. There are two variations: Format 0 and Format 1.
Using USB Flash Memory Loading User Files and Style Files User files and style file residing on a USB flash memory can be loaded to the instrument. 4 Use the dial to select the user file or CAUTION • Save important data to a USB flash memory before loading data that will overwrite it. 1 With the USB flash memory device containing the file you want to load connected to the USB TO DEVICE connector, check that the “CONNECT” message is shown in the MAIN display. tons to locate the Load item.
Using USB Flash Memory Deleting Data from USB Flash Memory This procedure deletes selected user files and SMF files from a USB flash memory device. 1 Make sure that the USB flash memory device containing the file(s) you want to delete has been properly connected to the instrument’s USB TO DEVICE terminal, and that the “CONNECT” is shown in the MAIN display. 2 Press the FILE MENU [MENU] button. 3 Use the CATEGORY [ r f ] and [ ] buttons to locate the Delete item. 4 Select the file you want to delete.
e erenc ef R Connections Connectors q w q USB TO HOST terminal This terminal allows direct connection to a personal computer. Refer to “Connecting a Personal Computer” on page 82 for more information. w USB TO DEVICE terminal This terminal allows connection to USB storage devices. Refer to “Connection to a USB Storage Device” below.
Connections Backing up the instrument data to a computer Once you’ve saved data to a USB flash memory device, you can copy the data to the hard disk of your computer, then archive and organize the files as desired. Simply reconnect the device as shown below. Saves internal data to a USB flash memory.
Connections Connecting a Personal Computer The following functions become available when this instrument is connected to a computer. ● Performance data can be transferred between the instrument and the computer (page 83). ● Files can be transferred between the instrument and the computer (page 85). The connection procedure is as follows: 1 Install the USB-MIDI driver on your computer. The USB-MIDI driver is included on the CDROM. Installation of the USB MIDI driver is described on pages 91–92.
Connections Transferring Performance Data to and from a Computer By connecting the instrument to a computer, the instrument’s performance data can be used on the computer, and performance data from the computer can be played on the instrument. ● When the instrument is connected with computer, it transmits/receives performance data.
Connections ■PC Mode ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● A number of MIDI settings need to be made when you want to transfer performance data between the computer and the instrument. The PC Mode item can conveniently make multiple settings for you in one operation. Three settings are available: PC1, PC2, and OFF. This setting is not necessary when transferring song or backup files between the computer and the instrument.
Connections Transferring Data Between the Computer and Instrument MIDI songs and Style files stored to a computer can be transferred to the instrument. Backup files can also be transferred from the instrument to the computer and back. In order to transfer songs between your computer and the instrument you will need to install the Musicsoft Downloader application and the USB MIDI Driver included on the Accessory CD-ROM on your computer.
Connections 5 A copy of the selected MIDI song file will appear in the “List of files stored temporarily” at the top of the window. The memory medium will also be displayed at the bottom of the window to specify the destination for the transfer. Click “Instrument,” and then “Flash memory.” “Flash memory” here refers to the internal memory of the instrument. 7 Close the window to close the Musicsoft Downloader.
Connections NOTE • Preset Song data cannot be transmitted from the instrument. 1 Press the [USER] button and select the song residing in internal memory for which you want to set the guide track. 2 Press the [FUNCTION] button. 3 Use the CATEGORY [ ] and [ ] buttons to select the R-Part or L-Part item. 4 Use the dial to select the channel you want to play back as the specified right- or left-hand part.
e erenc ef R Accessory CD-ROM Installation Guide SPECIAL NOTICES • • • • • • • This CD-ROM is copy-protected. Yamaha makes no representations or warranties with regard to any problems while attempting to copy the CD-ROM or software and cannot be held responsible for the results of attempts to copy the data. The software and this owner’s manual are the exclusive copyrights of Yamaha Corporation.
Accessory CD-ROM Installation Guide CD-ROM Contents q e Folder Name Application / Data Name w Contents q MSD_ Musicsoft Downloader This application can be used to transfer data between computer and instrument’s memory. w DMN_FlashDemo Flash Demo Digital Music Notebook is an educational content that lets you enjoy music while learning. Full motion demo software which introduces all features of the Digital Music Notebook.
Accessory CD-ROM Installation Guide System Requirements Application/Data OS CPU Memory Hard Disk Display Musicsoft Downloader Windows 98SE/Me/2000/ XP Home Edition/ XP Professional 233 MHz or higher; Intel® Pentium®/Celeron® processor family 64 MB or more (256 MB or more is recommended) at least 128 MB of free space (at least 512 MB of free space is recommended) 800 x 600 HighColor (16-bit) USB Driver for Windows 98/Me Windows 98/Me Windows 2000/XP Home Edition/XP Professional 32 MB or more (
Accessory CD-ROM Installation Guide Installing the driver on Windows 98/Me Installing the driver on Windows 2000 1 Start the computer. 2 Insert the supplied CD-ROM into the CD- 1 Start the computer and use the “Adminis- ROM drive. A start window will appear automatically. 3 First, make sure the POWER switch on the instrument is set to OFF, then use a USB cable to connect the USB terminal of the computer to the USB connector of the instrument.
Accessory CD-ROM Installation Guide Installing the driver on Windows XP 1 Start the computer and use the “Administrator” account to log into Windows. 2 Select [Start] ➔ [Control Panel]. If the control panel appears as “Pick a category”, click “Switch to Classic View” in the upper left of the window. All control panels and icons will be displayed. 3 Go to [System] ➔ [Hardware] ➔ [Driver Signing Options] and check the radio button to the left of “Ignore” and click [OK].
Accessory CD-ROM Installation Guide ■Troubleshooting The driver cannot be installed. • Is the USB cable connected correctly? Check the USB cable connection. Disconnect the USB cable, then connect it again. • Is the USB function enabled on your computer? When you connect the instrument to the computer for the first time, if the “Add New Hardware Wizard” does not appear, the USB function on the computer may be disabled. Perform the following steps.
Accessory CD-ROM Installation Guide NOTE • To delete these files using Explorer, select “Folder Options” from the Tool (View) menu, and select “Show all files (and folders).” • \WINDOWS\INF\OTHER\1039.INF • \WINDOWS\SYSTEM\Xgusb.drv • \WINDOWS\SYSTEM\Ymidusb.sys 4 5 6 Disconnect the USB cable. Restart the computer. Re-install the driver. 4.
Appendix Troubleshooting Problem Possible Cause and Solution When the instrument is turned on or off, a popping sound is temporarily produced. This is normal and indicates that the instrument is receiving electrical power. When using a mobile phone, noise is produced. Using a mobile phone in close proximity to the instrument may produce interference. To prevent this, turn off the mobile phone or use it further away from the instrument.
Messages LCD Message Comment Access error! Indicates the failure in reading or writing from/to the media or the flash memory. All Memory Clearing... Displayed while erasing all data in the flash memory. Never turn the power off during data transmission. Are you sure? Confirms whether Song Clear or Track Clear is executed or not. Backup Clearing... Displayed while clearing the back-up data in the flash memory. Cancel Displayed when the transmission of Initial Send is cancelled. Clearing...
Messages LCD Message Comment Saving... Displayed while saving data in the memory. Never turn the power off while saving. Doing so may result in data loss. Send OK? Confirms whether the data transmission is executed or not. Sending... Displayed while transmitting data. Since the media is in use now, this function is not available. Indicates that the file control function is currently unavailable since the media is being accessed.
Voice List Voice List ■ Maximum Polyphony ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● The instrument has 32-note maximum polyphony. This means that it can play a maximum of up to 32 notes at once, regardless of what functions are used. Auto accompaniment uses a number of the available notes, so when auto accompaniment is used the total number of available notes for playing on the keyboard is correspondingly reduced. The same applies to the Split Voice and Song functions.
Voice List Voice No. 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 1 2 3 4 5 6 7 8 9 10 11 12 13 14 1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 1 2 3 4 5 6 7 8 9 10 11 Bank Select MIDI Program Voice Name MSB LSB Change# (0–127) (0–127) (1–128) 0 114 62 FullHorns 0 118 58 SmoothTromb 0 115 62 HighBrass 0 113 64 OberBrass 0 122 62 TrumpetEns 0 119 62 MellowHorns 0 113 62 BigBandBrs 0 118 62 PopBrass 0 112 64 AnalogBrs 0 113 58 Trb.
Voice List Voice No.
Voice List ● XGlite Voice/XGlite Optional Voice* List Bank Select MIDI Voice Program Voice Name MSB LSB No.
Voice List 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 Bank Select MIDI Program MSB LSB Change# (0–127) (0–127) (1–128) 0 0 48 0 0 49 0 3 49 0 8 49 0 35 49 0 40 49 0 41 49 0 42 49 0 45 49 0 0 50 0 3 50 0 8 50 0 40 50 0 41 50 0 0 51 0 0 52 0 0 53 0 3 53 0 32 53 0 40 53 0 0 5
Voice List Voice No.
Drum Kit List Drum Kit List • “ ” indicates that the drum sound is the same as “Standard Kit 1”. • Each percussion voice uses one note. • The MIDI Note # and Note are actually one octave lower than keyboard Note # and Note. For example, in “128: Standard Kit 1”, the “Seq Click H” (Note# 36/Note C1) corresponds to (Note# 24/Note C0). • Key Off: Keys marked “O” stop sounding the instant they are released. • Voices with the same Alternate Note Number (*1 ... 4) cannot be played simultaneously.
Drum Kit List Voice No.
Drum Kit List Voice No.
Style List Style List Style No. Style Name Style No. Style Name Style No.
Music Database List Music Database List No.
Music Database List No.
Effect Type List Effect Type List ● Harmony Types No.
Effect Type List ● Chorus Types No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Type CHORUS1 CHORUS2 CHORUS3 CHORUS4 CHORUS5 CHORUS6 CHORUS7 CHORUS8 GM CHORUS1 GM CHORUS2 GM CHORUS3 GM CHORUS4 FB CHORUS CELESTE1 CELESTE2 FLANGER1 FLANGER2 FLANGER3 FLANGER4 FLANGER5 GM FLANGER SYMPHONIC1 SYMPHONIC2 PHASER1 PHASER2 EP PHASER1 EP PHASER2 EP PHASER3 ENS DETUNE ROTARY SP5 NO EFFECT Description Conventional chorus program with rich, warm chorusing.
Effect Type List No. 41 42 43 44 45 46 47 48 49 50 Type SYMPHONIC1 SYMPHONIC2 ENS DETUNE KARAOKE1 KARAOKE2 KARAOKE3 ER1 ER2 GATE REVERB REVERS GATE 51 EQ DISCO Description Adds more stages to the modulation of Celeste. Chorus effect without modulation, created by adding a slightly pitch-shifted sound. Echo for karaoke. This effect isolates only the early reflection components of the reverb. Simulation of gated reverb. Simulation of gated reverb played back in reverse.
Effect Type List No.
PSR-S500 Owner’s Manual Mode Change Control 0,32 1,11,84 6,38 7,10 64 71 72 73 74 91,93,94 96-97 100-101 Key's Ch's After Touch Pitch Bend Note ON Note OFF Velocity o x o o o x o x x o x o o 0-24 semi x x o 9nH,v=1-127 x 9nH,v=0 *1 *1 *1 *1 *1 0 - 127 : True voice ************** 3 x ************** Default Messages Altered Note Number 1 - 16 x Default Changed Basic Channel Function...
: True # x x x x o x Aux Mode 1 : OMNI ON , POLY Mode 3 : OMNI OFF, POLY *1 Refer to #2 on page 116. :All Sound OFF :Reset All Cntrls :Local ON/OFF :All Notes OFF Mes- :Active Sense sages:Reset o o x x x o o(120,126,127) o(121) o(122) o(123-125) o x o o x x x o o 0 - 127 Mode 2 : OMNI ON ,MONO Mode 4 : OMNI OFF,MONO o 0 - 127 ************** System : Clock Real Time: Commands Common : Song Pos. : Song Sel.
MIDI Data Format MIDI Data Format NOTE: 1 By default (factory settings) the instrument ordinarily functions as a 16-channel multi-timbral tone generator, and incoming data does not affect the panel voices or panel settings. However, the MIDI messages listed below do affect the panel voices, auto accompaniment, and songs. • MIDI Master Tuning • System exclusive messages for changing the Reverb Type and Chorus Type. 2 Messages for these control change numbers cannot be transmitted from the instrument itself.
Specifications Specifications Keyboards Song • 61 Standerd-size keys (C1–C6), with Touch Response.
Index +/YES, -/NO button ...................... 15, 41 >/■ button.............................. 14, 28, 41 button ........................................ 14, 28 A B button................................. 14, 65 f button...................................... 14, 28 r button ..................................... 14, 28 Dual Voice DSP Level.........................71 Dual Voice Octave...............................71 Dual Voice Pan ....................................71 Dual Voice Reverb Level .............
Index PAUSE ................................................ 28 PC ........................................................ 84 PHONES/OUTPUT jack............... 10, 15 Pitch Bend ........................................... 48 Pitch Bend Range ................................ 71 PITCH BEND wheel..................... 15, 48 Power Adaptor .................................... 10 PRESET button ............................. 14, 27 Preset Song.......................................... 29 Style Volume ...........
Limited Warranty 90 DAYS LABOR 1 YEAR PARTS Yamaha Corporation of America, hereafter referred to as Yamaha, warrants to the original consumer of a product included in the categories listed below, that the product will be free of defects in materials and/or workmanship for the periods indicated.
For details of products, please contact your nearest Yamaha representative or the authorized distributor listed below. Die Einzelheiten zu Produkten sind bei Ihrer unten aufgeführten Niederlassung und bei Yamaha Vertragshändlern in den jeweiligen Bestimmungsländern erhältlich. Pour plus de détails sur les produits, veuillez-vous adresser à Yamaha ou au distributeur le plus proche de vous figurant dans la liste suivante. NORTH AMERICA CANADA Yamaha Canada Music Ltd.
Yamaha Global Home http://www.yamaha.com/ Yamaha Manual Library http://www.yamaha.co.jp/manual/ U.R.G., Digital Musical Instruments Division © 2006 - 2011 Yamaha Corporation WH27920 103PO***.
