Owner's Manual
ZONE
2
Connecting
Zone
2
components
This unit allows you to configure a multi-room audio system. The Zone 2 feature enables you to set this unit to reproduce
separate input sources
in
the main room and
in
Zone 2 (the second room) simultaneously.
You
can control this unit from
the second room using the supplied remote control.
The R-S700 can also be operated using the supplied Zone 2 remote control.
You
need the following additional equipment to use the multi-room system
of
this unit:
o An infrared signal receiver for the second room.
o An infrared emitter for the main room. This emitter transmits the infrared signals sent by the remote control
in
Zone 2
to the components
in
the main room.
o An amplifier and speakers for the second room.
,0,
~<il~
Some
Yamaha models are able to
connect
directly to the
REMOTE
OUT
jack
on the rear panel
of
this unit.
If
you own one
of
these
products, you may not need to use an infrared emitter. Up to six Yamaha components can be connected as
shown
below.
REMOTE REMOTE REMOTE REMOTE
0-----
--
--
_!~
..
I
·Ir-::°....::;.UT-'-----'-'-IN
••
'
I....::;.O~UT'--_I_N
••
1 f
~lJ!
__
--
--
..
""==-~-""'=='
-.:::==----,==
-.:::==----.::==-"
Infrared signal
receiver
This unit
Yamaha component
Yamaha component
• Multi-room configuration and connections
The following illustration shows an example
of
a multi-room system configuration and connections.
ZONE 2 OUT
Amplifier
REMOTE
IN
Zone 2 C=:J) )))
Remote control
~
(R-S700 only) Infrared signal
receiver
f SPEAKER
Q
(
~.~!
This unit
f SPEAKER
Q
CD changer
(or other components)
LINE
I
..---..
:,--_._._----~
y Infrared emitter
':
I
' ,
'--
l,,
~~~~_:~~~_(_~~i_~_~~_~~~
:
L,--_s_ec_o_n_d_ro_o_m--,-cz_o_n_e_2:...>---,
REMOTE OUT
,0,
~<il~
Since there are many possible ways to connect and use this unit
in
a multi-room configuration, we
recommend
that you consult with
your
nearest authorized Yamaha dealer
or
service
center
for the
Zone
2 connections that best meet
your
requirements.
Note
If
you
want
to adjust the Zone 2 volume level by using the amplifier
in
the second room, we
recommend
setting the Zone 2 volume level
to
or
near 2.5 dB.
45
En