User Manual

14
Owner’s Manual
Connections
Connections
Installing a Mini-YGDAI card
Before you install I/O cards in slots 1–4, you must check the
Yamaha website to determine whether the card is
compatible with the RSio64-D, and to verify the total
number of Yamaha or third-party cards that can be
installed in combination with that card.
Yam a ha website :
http://www.yamahaproaudio.com/
To install an optional mini-YGDAI card, proceed as
follows.
1. Make sure that the power is turned off.
CAUTION
Before installing a Mini-YGDAI I/O card in this unit, you must
turn off the power of this unit and the power of the external
power supply. You must also verify that the SLOT ACTIVE
indicator is unlit. Malfunctions or electrical shock may occur
if you fail to observe this caution.
2. Loosen the screws that hold the slot cover in
place, and remove the slot cover.
Keep the removed slot cover and screws in a safe place.
3. Align the two edges of the card with the guide
rails inside the slot, and insert the card into the
slot.
Push the card all the way into the slot until the
connector of the card is correctly inserted into the
connector inside the slot.
4. Secure the card using the screws that are
attached to the card.
If the card is not secured, malfunction or faulty
operation may occur.
About Dante
Dante is a network audio protocol developed by Audinate.
It is designed to deliver multi-channel audio signals at
various sampling and bit rates, as well as device control
signals over a Gigabit Ethernet (GbE) network.
Visit the Audinate website for more details on Dante:
http://www.audinate.com/
More information on Dante is also posted on the Yamaha
Pro Audio website:
http://www.yamahaproaudio.com/
Slot cover
Card