User Manual

 Tips for network settings

1. The IP addresses of the devices you’re connecting must be

set to the same subnetwork.

*1 If the Wi-Fi access point does not have router functionality, specify the IP

address for accessing the Wi-Fi access point device.

2. Connect the target system to a LAN port of the Wi-Fi access

point.

If you connect it to the Ethernet port (WAN port), it will be

impossible to communicate correctly between the smart

device and the target system.

3. Start ProVisionaire Touch.

ProVisionaire Touch detects the target system and connects

automatically.

Example of a cor-

rect combination

of settings

Example of an

incorrect combi-

nation of settings

The Wi-Fi access point device’s

internal router and DNS

192.168.0.254 192.168.11.1

Target system 192.168.0.1 192.168.0.1

iPad 192.168.0.200 192.168.11.50

Computer 192.168.0.253 192.168.11.253