User Manual

Specifications
Owner’s Manual
32
Analog Input Characteristics
*1. XLR-3-31 type connectors are balanced. (1= GND, 2= HOT, 3= COLD)
*2. Rio3224-D2 only
* In these specifications, 0 dBu= 0.775 Vrms.
* +48V DC ( phantom power ) is supplied to INPUT XLR type connectors via each individual software controlled switch.
Analog Output Characteristics
*1. There are switches inside the body to preset the maximum output level.
*2. XLR-3-32 type connectors are balanced. (1= GND, 2= HOT, 3= COLD )
*3. Rio3224-D2 only
* In these specifications, 0 dBu= 0.775 Vrms.
Digital I/O Characteristics
Digital Output Characteristics
*1. Rio3224-D2 only
*2. XLR-3-32 type connectors are balanced. (1= GND, 2= HOT, 3= COLD)
Input
Terminals
GAIN
Actual Load
Impedance
For Use With
Nominal
Input Level
Connector
Nominal Max. before clip
INPUT 1-16
+66 dB
7.5 kΩ
50-600Ω Mics &
600Ω Lines
–62 dBu (0.616 mV) –42 dBu (6.16 mV)
XLR-3-31 type
(Balanced)
*1
–6 dB +10 dBu (2.45 V) +30 dBu (24.5 V)
INPUT 17-32
*2
+66 dB
7.5 kΩ
50-600Ω Mics &
600Ω Lines
–62 dBu (0.616 mV) –42 dBu (6.16 mV)
XLR-3-31 type
(Balanced)
*1
–6 dB +10 dBu (2.45 V) +30 dBu (24.5 V)
Output
Terminals
Actual
Source
Impedance
For Use With
Nominal
Max.Output Level
Select SW
*1
Output Level
Connector
Nominal Max. before clip
OUTPUT 1-8 75Ω 600Ω Lines
+24 dB (default) +4 dBu (1.23 V) +24 dBu (12.3 V)
XLR-3-32 type
(Balanced)
*2
+18 dB –2 dBu (616 mV) +18 dBu (6.16 V)
OUTPUT 9-16
*3
75Ω 600Ω Lines
+24 dB (default) +4 dBu (1.23 V) +24 dBu (12.3 V)
XLR-3-32 type
(Balanced)
*2
+18 dB –2 dBu (616 mV) +18 dBu (6.16 V)
Terminals Format Data length Level Audio Connector
Primary/Secondary Dante 24-bit or 32-bit 1000BASE-T
32ch (Rio3224-D2 to other devices)
24ch (Other devices to Rio3224-D2)
16ch (Rio1608-D2 to other devices)
8ch (Other devices to Rio1608-D2)
etherCON Cat5e
Terminal Format Data Length Level Connector
AES/EBU OUT 1-8
*1
AES/EBU
AES/EBU Professional use
*1
24-bit RS422
XLR-3-32 type (Balanced)
*2