User Manual

• The assigned function will be executed if the input voltage to the [GPI IN] connector falls from above to
below the middle voltage value.
■ GPI Output dialog box
•
[Active]button、[InActive]button
Press this button while the device is online to output at the GPI output a test signal according to the
Output Type setting.
For more information, refer to the explanation in the Output Type section.
Settings dialog box
Function
•
[SD Song Play]
The command will be output from the [GPI OUT] connector when an SD card file starts to play.
•
[Parameter]
The command will be output at the [GPI OUT] connector when the parameter value reaches the specified
status.
13. Audio Processors : DME7
ProVisionaire Design User Guide | 163