User Manual

14.2.2. "Properties" area
Displays/edits the MTX series information.
•
Remote Control
Here you can check the port numbers for connecting an external controller, or make settings for
connecting an external controller to RS-232C.
The [Remote Control] dialog is displayed from the , which is displayed when the property Value field is
clicked.
◦ [Network IP PORT No.]
This shows the port number of the MTX3’s NETWORK connector or the MTX5-D’s Dante
[PRIMARY]/[SECONDARY] connectors. You can connect up to eight external controllers or wireless
DCP to the port.
◦ [Remote(RS-232C) BIT RATE] box
Selects the RS-232C communication speed. You can select “38400” bps or “115200” bps. You can
connect one external controller to the RS-232C.
14. Audio Processors : MTX5-D/MTX3
176 | ProVisionaire Design User Guide