User Manual

Numbe
r
Component name Details Link
⑥
Slot In(MTX5-D only) Displays the audio signal level
being input from the Mini-YGDAI
card.
Right-click the [Slot in] or [Slot
Out] component, select the "Mini-
YGDAI Card" in the context menu
and then select the MY4-AEC
card “MY4-AEC ” component will
be displayed.
“MY4-AEC” component editor
⑦
DCP Sets the DCP control panel. "DCP"
⑧
Input Patch Assigns the input source to an
input channel.
---
⑨
Input Ch Performs signal processing for
input channels.
"Input CH" component editor
⑩
Input Fader Adjusts the level of the input
channel.
---
⑪
Fx Fader Adjusts the level of the effect
return.
---
⑫
Dugan Automixer In speech applications, the MTX3
automatically adjusts the auto-
mix gain for input channels 1 to
4, and the MTX5-D automatically
adjusts the auto-mix gain for
input channels 1 to 8.
"ProVisionaire Design DME7 Component
Guide"
⑬
Insert(MTX5-D only) Turns the Mini-YGDAI card insert
ON or OFF.
"Insert" component editor
⑭
Matrix Mixer Mixes the input channel signals
and sends them to each ZONE.
"ProVisionaire Design DME7 Component
Guide"
⑮
Matrix Out Fader Adjusts the level from the matrix
mixer to the ZONE.
---
⑯
Effect Adjusts the effect(s).
---
⑰
Zone This screen is used to specify
settings related to the PGM1
(MTX5-D only) and to output
signals based on the priority of
the input signal.
"Zone" component editor
⑱
From YDIF In
The input signal from the ④
[YDIF IN] terminal.
---
⑲
Oscillator Outputs the oscillator signal.
---
⑳
Zone Out Fader Adjusts the ZONE output level.
---
㉑
Router Assign signals to output
channels.
"ProVisionaire Design DME7 Component
Guide"
14. Audio Processors : MTX5-D/MTX3
ProVisionaire Design User Guide | 213