User Manual

17.5. Context Menu
17.5.1. "Tuning" sheet
The following context menu appears when you right-click the "Tuning" sheet.
Menu Content
[Select All]
[All Link Groups]
Selects all link groups in the sheet.
[Close All Editor Windows] Closes all editors.
[Snap to Grid] If this is checked, objects are placed in alignment with the grid of the
sheet.
17.5.2. Link group in the "Tuning" sheet
The following context menu appears when you right-click a link group, although certain menu items may be
present or absent.
Menu Content
[Open Link Group Editor] Opens the link group editor. For details on the link group editor, refer to
each device.
[Open Amplifier Sheet] Opens the device sheet of the selected amp.
[Identify]
Causes the indicators of the amp to flash for several seconds.
If a channel is selected on the PC-series amp, this causes the channel
indicator to flash for several seconds.
[Delete]
If a channel is selected, this deletes the channel from the link group.
If a device is selected, this deletes the device from the link group.
If a link group is selected, this deletes the link group.
[Bring to Front] Moves the link group to the foreground.
[Send to Back] Moves the link group to the background.
17.5.3. "Project Devices" area
The following context menu appears when you right-click a device or channel in the "Project Devices" area.
Menu Content
[Find] Places the focus on the link group in which the device or channel is
registered.
[Add to Link Group] Registers the amp’s channels in a link group. If the speaker is connected
to an amp, this registers the channel of the connected amp.
17. Power Amplifiers : XMV-series
ProVisionaire Design User Guide | 277