User Manual

10.19. "GPI Calibration" dialog box
To open this dialog box, click [GPI Calibration] from the [System] menu on the menu bar.
Here you can calibrate the input voltage detection range for the [GPI] connector of the device. Available only
when online. These settings adjust the detection range in order to stabilize the input voltage of the [GPI]
connector.
•
[Device:]
Enables you to select a target device to calibrate.
•
[All Ports] check box
Selects the check boxes of all channels.
•
[Ch] check boxes
Calibration will be applied to the channels whose boxes are selected
•
Calibration data
The input voltage is shown in real time as a graph.
10. Dialog boxes
94 | ProVisionaire Design User Guide