User Manual

GAIN menu
Owner’s Manual
15
GAIN menu
This shows the HA parameters of all input ports (upper line: port name, middle line: GC ON status and compensation gain
value, lower line: HA gain value), the port name of all output ports, and the status of the unit itself. In this menu you can set
the HA gain value of each input port.
Rio3224-D2 input ports
Rio3224-D2 output ports/status (upper right)
Rio1608-D2 input ports (left half) / output ports (lower right) / status (upper right)
Head amp (HA) gain value settings
By turning the encoder with switch, you can adjust the HA gain value of the selected port. This can be adjusted in the
range of –6 dB to +66 dB, in 1 dB units.
+48V ON menu
This shows the +48V parameters of all input ports (upper line: port name, lower line: +48V ON), the port name of all output
ports, and the status of the unit itself. In this menu, you can turn on/off the phantom power (+48V) of each input port.
Rio3224-D2 input ports
Rio3224-D2 output ports/status (upper right)
Rio1608-D2 input ports (left half) / output ports (lower right) / status (upper right)
Phantom power (+48V) settings
By turning the encoder with switch, you can turn on/off the phantom power (+48V) of the selected port. If the value is
changed, the display area of the currently selected parameter flashes. When you press the encoder, the setting is actually
specified, and the flashing stops. If you move the cursor while the parameter display area is flashing, the change is
discarded and the flashing also stops. In the same way, if you switch the menu selection while the parameter display area
is flashing, the change is discarded.