User Manual
Table Of Contents
- Contents
- PRECAUTIONS
- Introduction
- About Dante
- Controls and Functions
- Display Operations
- Operation Flow
- Menu structure
- Selecting menu items
- About the parameter display
- Selecting ports
- About port names
- METER menu
- GAIN menu
- +48V ON menu
- HPF ON menu
- HPF F menu
- GC (Gain Compensation) ON menu
- About the status indication
- SETUP menu
- Status bar
- INFORMATION menu
- Support for Dante Domain Manager (DDM) (V1.10 or later)
- Other functions
- About Connections
- Head Amp Control
- Troubleshooting
- Specifications
INFORMATION menu
Owner’s Manual
21
INFORMATION menu
This shows various information about this unit.
When the INFORMATION menu is selected
Selecting items and viewing detailed information
You can select items by pressing the (DEC) button or (INC) button. The highlighted indication disappears when
10 seconds have elapsed without any front panel operation being performed.
When you press the encoder with switch, detailed information for the selected item is shown. By turning the encoder,
you can scroll the displayed content up or down.
List of items
The viewable items are as follows.
SYSTEM information display example
DANTE information display example
*) DEVICE LABEL, SAMPLE RATE, ENCODING, LATENCY or PREFERRED LEADER can be set only from Dante Controller.
*) If this unit’s Dante Device Lock is enabled, or if AES67 mode is enabled, the respective icon is shown in the upper right.
LOG information display example
*) By turning the encoder, you can scroll the displayed content up or down.
REPORT information display example
*) By turning the encoder, you can scroll the displayed content up or down.
Item Description
SYSTEM Shows the version of this unit, the SYSTEM/SYNC status, and the ERROR occurrence status.
DANTE Shows information for Dante-related settings. (For display only)
LOG Shows the event/error history of this unit.
REPORT Shows basic information and historical information for this unit.