User Manual

CL Editor Owner’s Manual

Unless otherwise specified, the parameters explained below are common to INPUT CH 1–72 (CL3: 1-64,

CL1: 1-48) and ST IN channels 1–8.

❏ CHANNEL SELECT (Channel selection)

1 SELECT (Channel selection)

Indicates the number and name of the channel you are editing. To switch channels, you can either click the [SELECT]

button and choose from the list that appears, or you can click the plus/minus (+/–) channel select buttons on the left or

right side of the icon. You can right-click (<control> key + click) the icon and select the desired choice. If you left-click

the icon, you can select the channel color. You can also edit the channel name in the text box.

2 LIBRARY

Accesses the Input Channel Library. Click this button to open the INPUT CH page of the Library window.

3 PATCH (Input patch)

Selects the input source assigned to the input channel (for the selectable input sources, ➥ p.17.)

4 LR-MONO SELECT (ST IN channel only)

Enables you to select STEREO, L-MONO, R-MONO, or LR-MONO for ST IN channel mode.

● ST IN channel window

NOTE