User Manual

CL Editor Owner’s Manual

OUTPUT CHANNEL LINK page

If you link multiple output channels, the parameters for those channels will be linked together.

1 Link buttons

Select a link group (A–P) to which the channel is assigned. If you do not plan to link the channel, select NONE.

You can assign MIX channels 1–24 and MATRIX channels 1–8 to up to 16 groups.

2 CLEAR ALL

Clears all channel links.

3 LINK GROUP button

When you select a link group using the LINK button, the LINK GROUP button will also select the same group.

4 LINK PARAMETER

Selects parameters to be linked.

• The FADER parameters will maintain level differences between linked channels.

• The MATRIX SEND and MATRIX ON settings are ignored by the MATRIX channels.

5 SEND PARAMETER

This section enables you to specify the link status for each MATRIX SEND bus.

The TO MATRIX setting is ignored by the MATRIX channels.

EQ Equalizer settings

DYNAMICS Dynamics settings

INSERT Insert settings

MATRIX SEND Send amount from output channel to MATRIX bus

MATRIX ON MATRIX send on/off

FADER Fader level value

DCA DCA settings

CH ON Input channel module output on/off

MUTE Mute on/off

TO ST TO ST settings

NOTE