User Manual

Yamaha Commercial Audio
Dante-MY16-AUD HA Remote Control Guide
9 www.yamahaproaudio.com
Setting examples of mixed models:
System
Inputs
I/O Rack
Configuration
UNIT ID settings
(The numbers in parentheses are virtual IDs)
Rio3224-D
Rio1608-D
Ri8-D
32 ins
Rio1608-D x1
Ri8-D x2
1
(1, 2)
3, 4
(3, 4)
48 ins
Rio3224-D x1
Rio1608-D x1
1
(1－4)
3
(5, 6)
Rio3224-D x1
Ri8-D x2
1
(1－4)
5, 6
(5, 6)
Rio1608-D x2
Ri8-D x2
1, 2
(1－4)
5, 6
(5, 6)
Rio1608-D x1
Ri8-D x4
1
(1, 2)
3－6
(3－6)
64 ins
Rio3224-D x1
Rio1608-D x2
1
(1－4)
3, 4
(5－8)
Rio3224-D x1
Rio1608-D x1
Ri8-D x2
1
(1－4)
3
(5, 6)
7, 8
(7, 8)
Rio3224-D x1
Ri8-D x4
1
(1－4)
5－8
(5－8)
Rio1608-D x3
Ri8-D x2
1－3
(1－6)
7, 8
(7, 8)
Rio1608-D x2
Ri8-D x4
1, 2
(1－4)
5－8
(5－8)
Rio1608-D x1
Ri8-D x6
1
(1, 2)
3－8
(3－8)
Setting examples of a special case:
As for the system where each single unit of the Rio3224-D, the Rio1608-D, the
Ri8-D, and the AD8HR coexist, if you set UNIT IDs as follows, they will be
recognized as eight units of AD8HR with their IDs unique to each other.
・ AD8HR: ID 1 (automatically assigned in order of daisy chain connection)
・ Ri8-D: UNIT ID 2 (virtual ID 2)
・ Rio1608-D: UNIT ID 2 (virtual ID 3, 4)
・ Rio3224-D: UNIT ID 2 (virtual ID 5 to 8)
Note:
・ The number of units of controllable HA equipment (virtual IDs of AD8HR)
varies with the digital mixer, which can be checked at the EXTERNAL HA
screen etc. The PM5D, the M7CL, the LS9-32, the LS9-16, the DM2000, and
the DM1000 support eight, six, four, two, twelve, and four units, respectively.
Patching of an audio signal is limited only by the number of channels due to
that of cards used, regardless of the limitations above.