User Manual

17
PM5D
Individual mode
Balance mode
Pan: Copy
Pan: Copy
Balance: Copy
CL/QL
Pan for odd Ch
Pan for even Ch
Balance for odd & even
Ch
Pan mode
Balance mode
Mix/Stereo/Matrix Output Balance
PM5D
Un-paired Channel
Paired Channel
Balance is not available
Balance for odd & even Ch
CL/QL
Balance is not available
Balance for odd & even Ch
Un-paired Channel
Paired Channel
Mix to Stereo, Mix to Matrix & Stereo to Matrix: Pan/Balance
PM5D
Un-paired Channel
Paired Channel *
Odd Ch value
Even Ch value
Odd Ch value
Even Ch value
CL/QL
Pan: Copy Pan: Copy
Pan: L63
Pan: R63
Balance: Center
PM5D
Pan: Copy
Pan: Copy
Pan: L63
Pan: R63
CL/QL
Odd Ch value Even Ch value
Pan: L63
Pan: R63
Balance for odd & even Ch
Un-paired Channel
Paired Channel
* Mix to Stereo, Mix to Matrix and Stereo to Matrix on PM5D’s paired channels don’t have Balance.
6) For the Insert points and Direct Out points, if the same points cannot be selected on the
conversion destination model, the settings are adjusted appropriately and converted.
Insert Point -Input Channel
PM5D
Pre EQ
Post EQ
Pre Delay
Post Fader
CL/QL
Pre EQ
Pre Fader
Post On
Insert Point -Output Channel
PM5D
Pre EQ
Post EQ
Pre Fader
Post On
CL/QL
Pre EQ
Pre Fader
Post On
Direct Out Point -Input Channel
PM5D
Pre Att
Pre HPF
Pre EQ
Pre Fader
Post On
CL/QL
Pre HPF
Pre EQ
Pre Fader
Post On
7) Because the PM5D Attenuator range is from -96.0 dB to +24.0 dB and the CL/QL range is from -
96.0 dB to 0.0 dB, in the case of conversion from PM5D to CL/QL, limits may be placed on the
settings.
8) In the case of the PM5D Output EQ, only the LOWER band parameters are reproduced.
9) Key in source is reproduced according to the rules in the following table.
Dynamics Keyin Source -Mix Channel
PM5D
Self Pre EQ
Self Post EQ
Mix 21-24
Nearby Ch
Self Pre EQ
CL/QL
Self Pre EQ
Self Post EQ
Mix 21-24
Self Pre EQ
Nearby Ch
Dynamics Keyin Source -Matrix Channel
PM5D
Self Pre EQ
Self Post EQ
Mix 21-24
Matrix 1-8
Stereo AL-
BR
CL/QL
Self Pre EQ
Self Post EQ
Mix 21-24
Matrix 1-8
Self Pre EQ
Dynamics Keyin Source -Stereo Channel
PM5D
Self Pre EQ
Self Post EQ
Mix 21-24
Matrix 1-8
CL/QL
Self Pre EQ
Self Post EQ
Mix 21-24
Self Pre
EQ
PM5D
Stereo A L/R
Stereo BL
Stereo BR
CL/QL
Stereo L/R
Mono
10) The current scene's Mute Master On/Off setting in the source file is applied to all scene memories
in the destination file. Because on PM5D, the Mute Master setting changes as a result of a scene
recall, if you want to control it independently from the scene recall, apply Recall Safe to Mute
Master.
11) In the case of conversion from PM5D to CL/QL, PM5D Effect 1-8 are converted to CL/QL Effect
Rack 1-8. However, if a type, which cannot be used on CL/QL, is selected, the CL/QL scene data
after conversion will be have Rev-X Hall in a bypassed state.