User Manual

Dante Controller User Guide
Copyright © 2014 Audinate Pty Ltd. All rights reserved.
-72-
Manual Assignments
To manually apply a role to a device:
n Drag the role onto the device, or:
n Select the role in the 'Preset Roles' column and the target device/s in the 'Target Devices' column,
and click Apply.
The LEDicons against each role indicate the assignment status of the role.
A grey icon indicates that the role has not been assigned to any target devices.
A green icon indicates that the role has been successfully assigned to one or more target devices.
An amber icon indicates that the role has been assigned to one or more target devices, but there is a
warning condition associated with one or more of the assignments.
A red icon indicates that the role has been assigned to one or more target devices, but there is an error
condition associated with one or more of the assignments.
A black icon indicates that the role has been assigned to a target device, but the assignment will have a
potentially terminal effect on the operation of the network. A preset cannot be applied if any terminal issues
are identified.
Target Devices
The Target Devices column lists the device names of devices on the currently connected Dante network,
and the roles that have been assigned to them (if applicable).
The LEDicons against each device indicate the assignment status of the device.
A grey icon indicates that the device has not been assigned a role.
A green icon indicates that the device has been successfully assigned a role.
An amber icon indicates that the device has been assigned a role, but there is a warning condition
associated with the assignment.
A red icon indicates that the device has been assigned a role, but there is an error condition associated
with of the assignment.