User Manual
Table Of Contents
- How to Use This Reference Manual
- Contents
- Function Tree
- SELECTED CHANNEL section
- Centralogic section
- Input and output patching
- Input channels
- Signal flow for input channels
- Specifying the channel name, icon and channel color
- Making HA (Head Amp) settings
- Sending a signal from an input channel to the STEREO/MONO buses
- Sending a signal from an input channel to a MIX/ MATRIX bus
- Correcting delay between channels (Input Delay)
- Channel library operations
- Output channels
- EQ and Dynamics
- Grouping and linking
- Scene memory
- About scene memories
- Using scene memories
- Editing scene memories
- Using the Global Paste function
- Using the Focus function
- Using the Recall Safe function
- Using the Fade function
- Outputting a control signal to an external device in tandem with scene recall (GPI OUT)
- Playing back an audio file that links to a scene recall
- Using Preview mode
- Monitor and Cue functions
- Talkback and Oscillator
- Meters
- Graphic EQ, effects, and Premium Rack
- I/O device and external head amp
- MIDI
- User settings (Security)
- Recorder
- Help function
- Other functions
- About the SETUP screen
- Word clock and slot settings
- Using cascade connections
- Basic settings for MIX buses and MATRIX buses
- Switching the entire phantom power supply on/ off
- Specifying the brightness of the touch screen, LEDs, channel name displays, and lamps
- Setting the date and time of the internal clock
- Setting the network address
- Initializing the unit to factory default settings
- Adjusting the detection point of the touch screen (Calibration function)
- Adjusting the faders (Calibration function)
- Fine-tuning the input and output gain (Calibration function)
- Adjusting the channel color (Calibration function)
- Adjusting the brightness of the channel name display
- Adjusting the contrast of the channel name display
- Dante audio network settings
- Using GPI (General Purpose Interface)
- Appendices
- EQ Library List
- DYNAMICS Library List
- Dynamics Parameters
- Effect Type List
- Effects Parameters
- Premium Rack Processor Parameters
- Effects and tempo synchronization
- Parameters that can be assigned to control changes
- NRPN parameter assignments
- Mixing parameter operation applicability
- Functions that can be assigned to USER DEFINED keys
- Functions that can be assigned to USER DEFINED knobs
- Functions that can be assigned to the assignable encoders
- MIDI Data Format
- Warning/Error Messages
- Electrical characteristics
- Mixer Basic Parameters
- M IDI Implementation Chart
- Index
Graphic EQ, effects, and Premium Rack
Reference Manual
130
5. To begin recording (sampling), press the REC button and then press the PLAY
button.
The signal being input to the effect will be recorded. The bar reflects the current recording
progress. When a fixed time has elapsed, the buttons will automatically turn off.
NOTE
You can adjust the parameters in the window to make detailed settings for recording time, the way
in which recording will begin, and the way in which the sample will play back. For details on the
parameters, refer to the Appendices (see page 242).
6. To play back the recorded sample, press the PLAY button.
NOTE
The sampled content will be erased if you record another sample, change the effect, or turn off
the power to the CL unit.
Using the Premium Rack
About the Premium Rack
The CL series console features processors that faithfully emulate meticulously-selected vintage analog
processors, and a newly-developed Premium Rack, as well as graphic EQs and built-in effects. The
Premium Rack employs VCM technology, which models analog circuitry on a component level to
faithfully reproduce and fine-tune amazing analog sounds.
The Premium Rack offers six types of processors.
Using the Premium Rack
The procedure to set up the I/O patches for the rack are the same as those for the effect rack.
(see page 122)
For the premium rack, only racks 1–2 can be used via send/return. Racks 3–8 are only for patching as
inserts. (Refer to steps 5 and 6 of “Virtual rack operations” on page 115.)
1. In the Function Access Area, press the RACK button to access the VIRTUAL RACK
window.
2. In the upper part of the VIRTUAL RACK window, press the PREMIUM tab to display
the PREMIUM RACK field.
Name Outline
Portico 5033 Models RND’s analog 5-band EQ.
Portico 5043 Models RND’s analog compressor/limiter.
U76 Models a typical vintage compressor/limiter.
Opt–2A Models a classic vacuum tube (optical type) compressor.
EQ–1A Models a classic vacuum tube passive-type vintage EQ.
Dynamic EQ
Newly-developed EQ that features a dynamically changing gain and enables you to
control the cut/boost amount in relation to the input level.