User Manual
Table Of Contents
- How to Use This Reference Manual
- Contents
- Function Tree
- SELECTED CHANNEL section
- Centralogic section
- Input and output patching
- Input channels
- Signal flow for input channels
- Specifying the channel name, icon and channel color
- Making HA (Head Amp) settings
- Sending a signal from an input channel to the STEREO/MONO buses
- Sending a signal from an input channel to a MIX/ MATRIX bus
- Correcting delay between channels (Input Delay)
- Channel library operations
- Output channels
- EQ and Dynamics
- Grouping and linking
- Scene memory
- About scene memories
- Using scene memories
- Editing scene memories
- Using the Global Paste function
- Using the Focus function
- Using the Recall Safe function
- Using the Fade function
- Outputting a control signal to an external device in tandem with scene recall (GPI OUT)
- Playing back an audio file that links to a scene recall
- Using Preview mode
- Monitor and Cue functions
- Talkback and Oscillator
- Meters
- Graphic EQ, effects, and Premium Rack
- I/O device and external head amp
- MIDI
- User settings (Security)
- Recorder
- Help function
- Other functions
- About the SETUP screen
- Word clock and slot settings
- Using cascade connections
- Basic settings for MIX buses and MATRIX buses
- Switching the entire phantom power supply on/ off
- Specifying the brightness of the touch screen, LEDs, channel name displays, and lamps
- Setting the date and time of the internal clock
- Setting the network address
- Initializing the unit to factory default settings
- Adjusting the detection point of the touch screen (Calibration function)
- Adjusting the faders (Calibration function)
- Fine-tuning the input and output gain (Calibration function)
- Adjusting the channel color (Calibration function)
- Adjusting the brightness of the channel name display
- Adjusting the contrast of the channel name display
- Dante audio network settings
- Using GPI (General Purpose Interface)
- Appendices
- EQ Library List
- DYNAMICS Library List
- Dynamics Parameters
- Effect Type List
- Effects Parameters
- Premium Rack Processor Parameters
- Effects and tempo synchronization
- Parameters that can be assigned to control changes
- NRPN parameter assignments
- Mixing parameter operation applicability
- Functions that can be assigned to USER DEFINED keys
- Functions that can be assigned to USER DEFINED knobs
- Functions that can be assigned to the assignable encoders
- MIDI Data Format
- Warning/Error Messages
- Electrical characteristics
- Mixer Basic Parameters
- M IDI Implementation Chart
- Index
MIDI
Reference Manual
152
Using Program Changes to recall scenes and library
items
The CL series console lets you assign a specific event (scene recall or effect library recall) to each
Program Change number, so that when this event is executed on the CL console, a Program Change
message of the corresponding number will be transmitted to an external device. Conversely, the
corresponding event can be executed when a Program Change message is received from an external
device.
1. Connect the CL series console to an external device.
The following illustration shows an example of using the MIDI IN/OUT connectors to transmit
and receive MIDI messages.
2. In the Function Access Area, press the SETUP button to access the SETUP screen.
3. In the center of the screen, press the MIDI/GPI button to access the MIDI/GPI
popup window.
4. Press the MIDI SETUP tab to access the MIDI SETUP page, then select the port and
MIDI channel on which Program Changes will be transmitted and received, as
described in “Basic MIDI settings” on page 149.
5. Press the PROGRAM CHANGE tab to access the PROGRAM CHANGE page.
On the PROGRAM CHANGE page, you can specify how Program Changes will be transmitted
and received, and choose the event (scene recall or effect library recall) that will be assigned to
each program number.
This page includes the following items.
1 PROGRAM CHANGE
Switches Program Change transmission and reception on or off. This setting is linked with the
PROGRAM CHANGE section on the MIDI SETUP page.
• Tx ................................ Turn this button on to transmit corresponding Program Change
messages when events on the list are executed.
• Rx ................................ Turn this button on to execute corresponding events when Program
Change messages are received.
• ECHO ........................ Turn this button on to transmit Program Change messages that are
received from an external device.
2 PROGRAM CHANGE MODE field
Enables you to select the Program Change transmit/receive mode. This setting is linked with the
PROGRAM CHANGE MODE section on the MIDI SETUP page.
3 List
Shows the event (scene recall or library recall) assigned to each MIDI channel and MIDI Program
Change number. The list shows the following items.
• CH/BANK ................. If “CH” appears as the column heading instead of “BANK,” the column
indicates the MIDI channel (1–16) on which Program Changes are
transmitted/received. If Program Change transmission and reception is
in Single mode and the BANK button is on, this will be labeled “BANK,”
and the numerical value in this column will correspond to the bank
number.
• NO............................... Indicates the program number 1–128.
CL5
MIDI OUTMIDI IN MIDI OUTMIDI IN
External device
1
4
5
6
2
3