User Manual

R Remote Version 3 User’s Guide 17
You can double-click a numeric value box and enter a value directly from the keyboard.
The level meter located at the immediate right of the knob indicates the input level of the
corresponding port.
On the knobs, you can use the following shortcuts and context menu.
Action
Operation
<Ctrl> (<command>) + click
Sets analog gain to the default value (-6 dB).
<Ctrl> (<command>) + <Shift> +
click
Sets the analog gain to 0 dB.
Right click
Displays the following context menu.
[All Default]
Sets the analog gain of all
channels to the default value (-6
dB).
[All 0dB]
Sets the analog gain of all
channels to 0 dB.
ⓒ [HPF] button
This is an on/off switch for the high-pass filter that is built into the HA of the device. To
specify the cutoff frequency, make settings in the Edit window
.
② [+48V MASTER] indicator
Indicates the master phantom power on/off status for the device (the on/off setting is switched on
the device itself).
③ [SYSTEM] indicator / [SYNC] indicator
Indicates the status of the device or the Dante status. When you move the mouse cursor to this
area, the display content appears as a popup.
④ [PEAK HOLD] button
If this button is on, the peaks of each level meter are held. When you turn this off, the peaks that
had been held are cancelled.