User Manual

57
1. Tap the slider that you want to assign; in the context
menu that appears, tap [Parameter].
2. The [Slider Parameter Assign] screen appears.
You can assign continuously variable parameters such as volume. In
[Upper] and [Lower], specify the range of change. In [Home Posi-
tion], specify an offset for the home position of the slider. Use this
when assigning a parameter (such as EQ Gain) that has a default
value mid-way through its range of change. In [Tooltip], select
whether the parameter value shown when the knob is operated will be
Raw or Normalized.
Assigning parameters to a slider
• Assigning a parameter of the MRX7-D
If the MRX7-D is the device being controlled, the index that can
be specified depends on the type of widget.
* : Can be set
* If the index has changed to something that cannot be specified for the
widget, for example because the Remote Control Setup List was
reloaded, the connection between the two is canceled.
Remote Control
Setup List
Widget
Button
Slider/
Value
Function Type
Single
Latch
Multi Inc/Dec Snapshot
Parameter
On/Off type 
Level type 
Variable
other than
level type

Level Meter
Link
Group
On/Off type 
Level type 
Variable
other than
level type

Snapshot 
Snapshot Group 