CL/QL series V5.1 Supplementary Manual This supplementary manual explains mainly the functions that have been added or changed in CL5/CL3/CL1 and QL5/QL1 firmware V5.1. Use it in conjunction with the CL5/CL3/CL1 and QL5/QL1 Owner’s Manual and Reference Manual. NOTE • The explanations in this supplementary manual reference the CL5.
Contents Contents I/O devices and external head amps ........................................ 3 Added supported devices ........................................................................................ Remotely controlling an external head amp............................................................. Remotely controlling wireless units .......................................................................... Remotely controlling an amp.............................................................
I/O devices and external head amps I/O devices and external head amps Remotely controlling an external head amp Now supports the HA remote controllable devices. • Stagetec NEXUS(XDIP) Multichannel I/O Board • Yamaha MRX/MTX series Signal Processors Now supports various Dante devices such as digital wireless receivers, processors, and more from third-party partners, plus NEXO and Yamaha.
I/O devices and external head amps I/O DEVICE HA window Remote control settings This screen is displayed when you select the desired I/O device in the I/O DEVICE screen (I/O page). You can remotely control the head amp of the I/O device. • MTX/MRX series The following settings are necessary to control the MTX/MRX series remotely. For Stagetec NEXUS(XDIP) STEP 1. Install the MTX-MRX Editor on the computer. 2. Connect the MTX-MRX series and Editor according to the MTX-MRX Editor user guide. 3.
I/O devices and external head amps Remotely controlling wireless units 7 Audio level indicator Now supports wireless units as remote controllable devices. • Sony DWR-R03D DWX Digital Wireless Receiver 8 MUTE indicator I/O DEVICE screen (WIRELESS page) 9 Signal quality meter Lights if the audio signal level of the receiver reaches the overload point. Indicates the mute status (on/off) of the audio signal for the receiver. Displays the quality of the received RF signal.
I/O devices and external head amps I/O DEVICE EDIT screen 7 RX.LEVEL meter This screen is displayed when you select the desired wireless device in the I/O DEVICE screen (WIRELESS page). Here you can set the channel name and HA. 8 MUTE button Indicates the input level for the receiver. Mutes the audio signal for the receiver. B 1 2 9 Signal quality meter Displays the quality of the received RF signal.
I/O devices and external head amps 6 MUTE indicator Remotely controlling an amp Indicates the currently set mute status. Now supports the remote controllable devices. • NEXO NXAMPmk2 Powered TD Controller • Yamaha DZR- D series Powered Loudspeakers DXS XLF-D series Powered Subwoofers 7 Control status indicator Indicates the control status of the device. 8 Device status indicator Indicates the status of the device.
I/O devices and external head amps I/O DEVICE EDIT screen 3 CABINET This screen is displayed when you select the desired I/O device in the I/O DEVICE screen (AMP page). You can remotely control the amplifier or the speakers. 4 VERSION Displays the name of NEXO Setup selected in the NXAMP. Displays the firmware version of the device. For NEXO NXAMPmk2 2 5 3 5 INPUT METER 4 Displays both the input analog input levels and digital input levels.
I/O devices and external head amps 8 DELAY ON button For Yamaha DZR-D series, DXS XLF-D series 2 5 Switches the delay on or off. 8 9 DELAY knob Sets the delay time. 0 DELAY TIME 1 Displays the delay time by time (TIME) and distance (meter, feet). 3 A A Output level meter C D E B MASTER LEVEL knob Displays the output level of the speakers. Sets the output level. C LIMIT indicator Lights while the limiter for amplifier or power supply protection is applied.
Yamaha Pro Audio global website http://www.yamahaproaudio.com/ Yamaha Downloads https://download.yamaha.
