Owner’s Manual Keep This Manual For Future Reference.
Contents About Connections PRECAUTIONS................................... 5 Introduction 7 Features .............................................................7 Firmware Updates ..............................................7 Precautions for Rack Mounting ..........................8 Recessed Installation ..........................................8 Daisy Chain Network .......................................25 Star Network....................................................
ATTENTION RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The above warning is located on the rear of the unit. ATTENTION : POUR RÉDUIRE LES RISQUES D'ÉLECTROCUTION, NE PAS RETIRER LE CAPOT (OU LE DOS). NE CONTIENT PAS DE PIÈCES NÉCESSITANT L'INTERVENTION DE L'UTILISATEUR. POUR TOUTE INTERVENTION, FAIRE APPEL À DES PROFESSIONNELS QUALIFIÉS.
FCC INFORMATION (U.S.A.) 1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! not guarantee that interference will not occur in all installations. If this product is found to be the source of interference, which can be determined by turning the unit “OFF” and “ON”, please try to eliminate the problem by using one of the following measures: Relocate either this product or the device that is being affected by the interference.
PRECAUTIONS PLEASE READ CAREFULLY BEFORE PROCEEDING Please keep this manual in a safe place for future reference. Water warning • Do not expose the device to rain, use it near water or in damp or wet conditions, or place on it any containers (such as vases, bottles or glasses) containing liquids which might spill into any openings. If any liquid such as water seeps into the device, turn off the power immediately and unplug the power cord from the AC outlet.
• Before moving the device, remove all connected cables. • If the device is mounted in an EIA standard rack, carefully read the section “Precautions for Rack Mounting” on page 8. Inadequate ventilation can result in overheating, possibly causing damage to the device(s), malfunction, or even fire. Maintenance Information About copyrights * Copying of the commercially available musical data including but not limited to MIDI data and/or audio data is strictly prohibited except for your personal use.
Introduction Introduction Thank you for choosing the Yamaha Rio3224-D2/Rio1608-D2 I/O Rack. This product is a Dante-compatible I/O rack for use in a mixing system. The Rio3224-D2 is an I/O rack featuring 32 channels of analog input, 16 channels of analog output, and 8 channels of AES/EBU output. The Rio1608-D2 is an I/O rack featuring 16 channels of analog input and 8 channels of analog output.
About Dante Precautions for Rack Mounting This unit is rated for operation at ambient temperatures ranging from 0 to 40 degrees Celsius. When mounting the unit with other Rio-D2 unit(s) or other device(s) in an EIA standard equipment rack, internal temperatures can exceed the specified upper limit, resulting in impaired performance or failure.
Controls and Functions Controls and Functions Front Panel 1 2 3 45 6 7 89 0 A B 3 1 [INPUT] Connectors 1–32 {1–16} These are the XLR-3-31 type analog balanced connectors for the input channels. The input level range is from –62 dBu to +10 dBu. +48V phantom power can be supplied to devices that require it via the input connectors. 2 [+48V] Indicators These indicators light when +48V phantom power is turned ON for the corresponding input channels.
Controls and Functions 9 Power Switch ( ) Turns power to the unit ON or OFF. CAUTION: Even when the power switch is turned off, electricity is still flowing to the product at the minimum level. When you are not using the product for a long time, make sure to unplug the power cord from the wall AC outlet. NOTE Rapidly turning the unit on and off in succession can cause it to malfunction. After turning the unit off, wait for about 6 seconds before turning it on again.
Rear Panel Rear Panel C D E F C [PRIMARY]/[SECONDARY] Connectors These are etherCON (RJ45) ports can be connected to other Dante devices such as a RIVAGE PM, CL, QL, or TF series unit using Ethernet cables (CAT5e or better recommended). If the SETUP menu SECONDARY PORT parameter is set to DAISY CHAIN in the display, the signal that is input from one port is transmitted to the other port.
Display Operations Display Operations Operation Flow On the Rio-D2, you can use the front panel display, (DEC) button, (INC) button, and the encoder with switch to set the various parameters that are shown in each menu. • The menu name is shown at the left edge of the display. • The parameters of each menu are shown in the center of the display. • The status of the unit is shown by icons at the right edge of the display.
Selecting ports Selecting ports For the METER menu You can select ports by pressing the (DEC) button or (INC) button. When you do so, the selected port’s LEDs (+48V/SIG/PEAK for Input, or SIG for Output) is lit for one second. The corresponding location is indicated by a white frame cursor. The white frame cursor disappears when 10 seconds have elapsed without any front panel operation being performed.
Display Operations METER menu Level meters for all input ports are shown at the left, and level meters for all output ports are shown at the right. The upper part of the display shows icons that indicate the +48V ON, HPF ON, and GC ON status of the selected port.
GAIN menu GAIN menu This shows the HA parameters of all input ports (upper line: port name, middle line: GC ON status and compensation gain value, lower line: HA gain value), the port name of all output ports, and the status of the unit itself. In this menu you can set the HA gain value of each input port.
Display Operations HPF ON menu This shows the HPF parameters of all input ports (upper line: port name, middle line: HPF cutoff frequency, lower line: HPF ON status), the port name of all output ports, and the status of the unit itself. In this menu you can set the HPF on/off status of each input port.
GC (Gain Compensation) ON menu GC (Gain Compensation) ON menu This shows the GC parameters of all input ports (upper line: port name, middle line: compensation gain value if GC is ON; HA gain value if GC is OFF, lower line: GC ON status), the port name of all output ports, and the status of the unit itself. In this menu you can set the GC on/off status of each input port.
Display Operations SETUP menu This shows the current values for various setup parameters of this unit. Selecting a setup item You can select setup items by pressing the (DEC) button or (INC) button. The parameter value of the selected item is highlighted. The highlighted indication disappears when 10 seconds have elapsed without any front panel operation being performed. You can switch screens by long-pressing the (DEC) button or (INC) button.
SETUP menu Item/parameter Description Values SECONDARY PORT Specifies the operating mode of the Dante secondary port. DAISY CHAIN*, REDUNDANT FAN SPEED Specifies the rotation speed of the fan. LOW*, HIGH NETWORK MODE Selects the IP address setting mode. This IP address is used when remotely controlling the unit from a computer, or when updating the firmware. This is different than the IP address for Dante. AUTO*, STATIC IP IP ADDRESS Specifies the IP address. (when STATIC IP is specified) 0.
Display Operations Status bar The status bar at the right edge of the display shows icons to indicate the status of the Rio-D2 unit. Icon Six types of icons are shown. ERROR INFORMATION MUTE DAISY CHAIN PANEL LOCK HA READ ONLY The displayed position depends on the icon. Upper line Shows the ERROR icon or the INFORMATION icon . If both ERROR and INFORMATION have occurred, the ERROR icon takes priority and is shown. If neither ERROR nor INFORMATION has occurred, nothing is displayed.
INFORMATION menu INFORMATION menu This shows various information about this unit. When the INFORMATION menu is selected Selecting items and viewing detailed information You can select items by pressing the (DEC) button or (INC) button. The highlighted indication disappears when 10 seconds have elapsed without any front panel operation being performed. When you press the encoder with switch, detailed information for the selected item is shown.
Display Operations Support for Dante Domain Manager (DDM) (V1.10 or later) NOTE Firmware V1.10 or later is required for Rio-D2 to enroll a domain with DDM. INFORMATION – DANTE screen When enrolling a domain: The DDM indicator appears at the top of right side of the DANTE screen. The R/W indicator or the R/O indicator also appears, depending on the LOCAL CONTROLLER ACCESS setting for the DDM server.
Support for Dante Domain Manager (DDM) (V1.10 or later) INFORMATION – REPORT screen Enrolling a domain * Local Access = Read Only, Remote Access = None No DDM server 1 DDM_CONNECT_STATE Displays the connection status to the DDM server in the network. • CONNECTED: The unit has been connected to the DDM server in the network. • DISCONNECTED: There is no DDM server in the network. 2 DDM_DOMAIN_KIND Displays the enrolling status for the DDM domain.
Display Operations Other functions Initializing to the factory-set state If you turn on the power while holding down both the (DEC) button and (INC) button, you can enter a mode that returns this unit’s settings to their factory-set state. This is the same as if you use the SETUP menu to select INITIALIZE → FACTORY PRESET.
About Connections About Connections There are two ways to connect the Rio-D2 to a Dante network. NOTE A daisy chain connection is suitable for a simple system with a small number of devices. Use a star network if a large number of devices are connected. Daisy Chain Network A daisy chain is a wiring scheme in which multiple devices are connected together in sequence. In this way, networking is simple and requires no network switches.
Head Amp Control Dante Network Settings and Audio Routing Head Amp Control Rio-D2 does not have the function for changing Dante network settings, such as Sample Rate, Latency or Encoding. The Dante network settings will be controlled from Dante Controller or the supported digital mixers. For details on the Dante network settings, refer to the corresponding owner’s manual of the supported digital mixers. The audio inputs and outputs of multiple Dante devices can be freely routed within a Dante network.
Troubleshooting Troubleshooting Troubleshooting Symptom The power won’t turn on. The power indicator doesn’t light. The unit is not receiving an input signal. The input level is too low. Cause Possible Solution The power cable is connected improperly. Connect the power cable properly (see page 11). The [POWER] switch is not turned ON. Turn the [POWER] switch ON. If the power still will not come on, refer the problem to your Yamaha dealer. The input cables are not connected properly.
Troubleshooting Messages The front panel display of the Rio-D2 shows various messages such as errors, alerts, warnings, information, and confirmations. Error Messages Message Description Possible Solution SYSTEM DOWN - PLEASE CONTACT YAMAHA SERVICE A system error was detected at the previous execution. Contact a Yamaha service center. DANTE MODULE ERROR A problem was detected in the Dante module. Restart this unit.
Messages Information Messages Message Description FACTORY INITIALIZE IN PROGRESS Started initializing to the factory-set state. FACTORY INITIALIZE COMPLETED Finished initializing to the factory-set state. HA MEMORY INITIALIZE IN PROGRESS Started initializing the HA parameters. HA MEMORY INITIALIZE COMPLETED Finished initializing the HA parameters. DANTE INTIALIZE IN PROGRESS Started initializing the Dante settings. DANTE INITIALIZE COMPLETED Finished initializing the Dante settings.
Troubleshooting SYNC Messages Message ID * Description Operating normally ––– SYNCHRONIZATION Currently processing synchronization within the Dante network. Wait until startup or synchronization is completed. It may take up to 45 seconds for this to be completed. WRONG WORD CLOCK! E01-03 The word clock setting is incorrect. On the supported digital mixer or in Dante Controller, set the clock master and the sampling frequency correctly.
Specifications Specifications General Specifications Sampling Frequency External 44.1 kHz +4.1667%, +0.1%, –0.1%, –4.0% ±200 ppm 48 kHz +4.1667%, +0.1%, –0.1%, –4.0% ±200 ppm 88.2 kHz +4.1667%, +0.1%, –0.1%, –4.0% ±200 ppm 96 kHz +4.1667%, +0.1%, –0.1%, –4.0% ±200 ppm Signal Delay Less than 1.7 ms Rio-D2 INPUT to Rio-D2 OUTPUT connect with PM10 using Dante, Fs= 96 kHz. Dante Receive Latency set to 0.25 msec Frequency Response +0.5, –1.
Specifications Analog Input Characteristics Input Terminals GAIN +66 dB INPUT 1-16 –6 dB +66 dB INPUT 17-32*2 –6 dB Actual Load Impedance For Use With Nominal 7.5 kΩ 7.5 kΩ Input Level Nominal Max. before clip 50-600Ω Mics & 600Ω Lines –62 dBu (0.616 mV) –42 dBu (6.16 mV) +10 dBu (2.45 V) +30 dBu (24.5 V) 50-600Ω Mics & 600Ω Lines –62 dBu (0.616 mV) –42 dBu (6.16 mV) +10 dBu (2.45 V) +30 dBu (24.5 V) Connector XLR-3-31 type (Balanced)*1 XLR-3-31 type (Balanced)*1 *1.
Dimensions Dimensions 11.5 350 367.5 6 Rio3224-D2 220 480 11.5 350 367.5 6 Rio1608-D2 132 480 Unit: mm * The contents of this manual apply to the latest specifications as of the publishing date. To obtain the latest manual, access the Yamaha website then download the manual file.
ADDRESS LIST NETHERLANDS/BELGIUM/ LUXEMBOURG NORTH AMERICA CANADA Yamaha Music Europe Branch Benelux Clarissenhof 5b, 4133 AB Vianen, The Netherlands Tel: +31-347-358040 Yamaha Canada Music Ltd. 135 Milner Avenue, Toronto, Ontario, M1S 3R1, Canada Tel: +1-416-298-1311 FRANCE U.S.A. Yamaha Corporation of America 6600 Orangethorpe Avenue, Buena Park, CA 90620, U.S.A. Tel: +1-714-522-9011 CENTRAL & SOUTH AMERICA MEXICO Yamaha de México, S.A. de C.V. Av. Insurgentes Sur 1647 Piso 9, Col.
Yamaha Pro Audio global website http://www.yamahaproaudio.com/ Yamaha Downloads https://download.yamaha.
