User Manual
Table Of Contents
- ■ Precautions (Please be sure to read this section first!)
- ■ Update procedure sequence
- ■ Checking the version number
- ■ Preparing for the update
- ■ Updating the RMio64-D firmware
- ■ Installing the Dante Firmware Update Manager
- ■ Computer TCP/IP setting
- ■ Updating the Dante firmware
- ■ About Failsafe Mode
- ■ Error Message List (RMio64-D Update Program)
11
5.
Click [Update Dante Firmware].
6.
Click [Browse] and select “FWUpdate_RMio64D-vxxx-swyyy.dnt,” then click
[Open].
The characters “xxx” and “yyy” represent the firmware version number.
The Dante firmware does not operate normally if its path contains any multi-byte
character (including Japanese characters). If you use a directory name containing
any multi-byte character in your computer, store the firmware update files in a
directory that consists only of ASCII characters. (e.g. C:\temp).
Notice:
If update files other than RMio64-D are applied, the device will become inoperable.
Be sure to ensure compatibility of the update files with RMio64-D. To ensure that
updating the device with invalid or wrong files is prevented, do not check the
[Override Device Matching] option. If this option is left unchecked, you can select
only supported devices with the update file.
7.
Click [Next].
• Dante Firmware Update Manager may be blocked by the Windows Firewall.
Check the all check boxes, and click [Allow access].
• In Mac, the confirmation dialog box which accepts incoming network
connections from an application may appear. Click [Allow].
8.
Check the RMio64-D to update.
Check the version of the update files and the version number indicated in the
RMio64-D line.