User Manual
Table Of Contents
- Contents
- What you can do using ProVisionaire Touch
- Operating requirements of the software
- Terms and concepts to understand
- Installation procedure
- Startup
- Basic process
- Operations for common settings
- About the menu bar
- Settings file management — the File Management button
- Selecting multiple widgets — Multi Select button
- Creating a custom panel — the Page Edit button
- Widget design
- Assigning parameters
- Switching pages — the Page Selection button (Control mode)
- Managing pages — the Page Management button (Design mode)
- Registering devices to control — the Device Management button
- Control panel settings — the Setup button
- Control panel information — the Information button
- Preparations before you make connections
- Troubleshooting
- About the software license
65
* If a monitor device is not specified, the page of this app does not change
even if you switch the [Preset] on the device. To associate a device with a
[Preset], make settings in Monitor Device.
The initially displayed page is indicated by a mark. You can tap
to change the initially displayed page.
* You can specify a different initially displayed page for each [Preset] (see the
box at right).
Rename: Renames the selected page. Edit the page name shown in
the input field, and tap [Done].
Duplicate: Duplicates the selected page. When you tap [Duplicate],
a duplicate page is created with an “_1” appended to the end of the
selected page name. The attributes of the page (such as the authenti-
cation code setting and Auto Page Change setting) are also dupli-
cated.
* If an identically named page already exists, the number is automatically
incremented as “_2” or “_3” etc.
Example) Setting a different initially displayed page
for [Preset 1], [Preset 2], and [Preset 3]
1. In advance, prepare three pages for use as the initially
displayed pages.
2. Choose [Edit] page for initial display with Pre-
set 1 [Auto Page Change] to access the following
screen, and then turn the Preset 1 switch On ( ).
3. Tap Preset 1’s ; in the screen that appears, tap the
indication of the initially displayed screen for Preset
1 (in this example, Top Page 1).
With these settings when [Preset 1] is selected, the initially dis-
played screen is set to “Top Page 1.”
In the same way, assign the initially displayed screen for Preset
2 and Preset 3.